Topic: Duox Install (Read 80 times)

LordTrace · « **on:** June 10, 2006, 06:26:00 AM »

Been looking and reading up on installing the DuoX2 .. And it looks like after you have soldered the headers to the chip and board you you just stick it on... My question is how do you get it to stay on .. Say in shipping or if your moving .. couldnt it just fall off if you Xbox was ever upside down?

The only thing I can think of is putting tape around the black plastic that the pins are going through... Is this what most of you do?

LordTrace · « **Reply #1 on:** June 10, 2006, 08:15:00 AM »

Chancer · « **Reply #2 on:** June 10, 2006, 02:18:00 PM »

Shipped out hundreds, never had one move yet.
If you are worried stick a blob of hot glue on the join between the headers

A@ron · « **Reply #3 on:** June 10, 2006, 05:28:00 PM »

friction between the male pins and the female part keep it in place even during shipping.

<ot> yes I know I used male, female and friction in one post so what?</ot>

LordTrace · « **Reply #4 on:** June 10, 2006, 07:09:00 PM »

heh

Thanks

Author Topic: Duox Install (Read 80 times)