xboxscene.org forums

Author Topic: Duox2 White Boot Problems  (Read 97 times)

EvilCloudStrife

  • Archived User
  • Newbie
  • *
  • Posts: 23
Duox2 White Boot Problems
« on: March 19, 2006, 04:14:00 PM »
i had this problem with my very first install a while ago. turned out the solder came loose (wasnt a solid solder point on some of the spots)

go ahead and resolder the pinheader points again on the motherboard and the modchip as well

make SURE they are solid

also make sure the pins are plugged into the right holes
Logged

gjm

  • Archived User
  • Full Member
  • *
  • Posts: 116
Duox2 White Boot Problems
« Reply #1 on: March 19, 2006, 04:47:00 PM »
Have you tried booting from the other bank? Maybe you flashed a dodgy BIOS over the current bank by accident. If the other bank doesnt work either then yeah, check your soldering.

A couple of early boxes i chipped, meddling kids would hit flash not knowing what they were doing and then call me up "it's broken!" - i now disable the flash command in EvoX  tongue.gif
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Duox2 White Boot Problems
« Reply #2 on: March 19, 2006, 04:49:00 PM »
Dodgy LPC soldering unless as already mentioned you accidentally flashed the chip
Logged

fyallm

  • Archived User
  • Newbie
  • *
  • Posts: 1
Duox2 White Boot Problems
« Reply #3 on: March 19, 2006, 10:49:00 PM »
here we go, i think everything is soldered correctly it is too dark right now to take pictures of the soldering job but tomo in the daylight i will take a picture..


and yes i tried both banks.. It did work before but when we tried to reflash the chip after a mess up it wont work..
Logged