Topic: Duox2 (white) Help (Read 65 times)

etrain1984 · « **on:** October 27, 2005, 04:24:00 PM »

The chip is flashing red or the power/eject light flashes red, because the duox2 does have a red led on it that flashes I believe. If its the power/eject button are you getting any sort of an error message on the screen? Did you attempt to flash yet and if so did it work? Also, use flashbios 3.0.3 instead of 3.0.1... Hope this helps.

npproneck · « **Reply #1 on:** October 27, 2005, 05:33:00 PM »

power/eject light flashes red, no display on sceen at all,many dirrerent flash attempts all with the same result. will try flashbios 3.0.3. I am lost

npproneck · « **Reply #2 on:** October 27, 2005, 05:49:00 PM »

I can't find flashbios 3.0.3 to download, Any one , Any ideas?

npproneck · « **Reply #3 on:** October 27, 2005, 06:28:00 PM »

O.K. got flashbios 3.0.3 back on the duox2 So i am back at virgin status, Flashed the bios again went though it all just fine, when i go to power up, flashing red eject/power light. I have tried alot of different bios all 512k. What am I missing?

npproneck · « **Reply #4 on:** October 27, 2005, 08:10:00 PM »

I'm thinking this is a problem with the harddrive?

hippo · « **Reply #5 on:** October 27, 2005, 11:04:00 PM »

What you are missing is you need flashbios 3.0.3 unauthorized to restore the serial eeprom. Since the linux kernel doesn't need the eeprom that loads but the flash to M8 causes a red flash. This is a classic dead eeprom. Flashbios unauthorized has the proper images for all 3 types of eeproms so you need to restore the eeprom for the xbox version that applies in your case. After you use flashbios to restore the serial eeprom you can use it again to flash to M8. Then you can restore your back up eeprom and you are good to go. Also there is an option to unlock your hard drive with flashbios, try that first since your headed for a generic eeprom.

npproneck · « **Reply #6 on:** October 28, 2005, 07:38:00 AM »

Hard drive will not unlock (Or lock.) I can't find a good m8 bios, where ever I get them from they are all 0kb .bin files. So i put an M7 on it boots up then locks on the Xbox splash screen.
When I got this xbox last year it was dead (coma I think its called) put in a duox2 flashed it and all was well. Some time later I decided to put a Evox on it and all was fine untill reboot and it was dead again. So I put it in the closet and forgot about it for a couple months, No I have time to mess with it again. Rambling........Sorry

Author Topic: Duox2 (white) Help (Read 65 times)