Topic: Duo X2 Flash Bios Problem Plz Help (Read 96 times)

jkisling · « **on:** October 14, 2005, 09:12:00 PM »

I got my xbox from modordie.com so it is different then regular just so you know. I made a cd with M8 plus bios because it said it was for all versions of xbox then I put 100mb dump.txt file with the bios files which I renamed bios.bin and 256kbios.bin...I put it in my xbox when it said flash bios by cd it did everything just fine..it took like 1 second the yellow then green bar came up, my xbox turned of then I powered up with eject button and booted just like normal........I switched the bank to my modchip and cromwell still shows so I switched back to flash bios screen and it turns on and off like three times then just sites there nothing on the tv screen and the eject button just sits there flashing. I dont know what to do I dont get a menu or anything..plz help..

I am so sad I really wanted it to work.

benskigomez · « **Reply #1 on:** October 14, 2005, 09:26:00 PM »

What version of XBox do you have? If it is not 1.6 I would not use the M8 plus. Try booting the Eurasia Pro disc and flashing with 512k M7.

jkisling · « **Reply #2 on:** October 14, 2005, 09:36:00 PM »

whats the euratia disk that your talking about?
How would I flash it again if i dont even get a flash bios menu?

benskigomez · « **Reply #3 on:** October 14, 2005, 09:46:00 PM »

If you can boot to the cromwell bank you should be able to reflash. Check HachDaBox's site http://www.hackdabox.com/ for more info on the DuoX2 install.

jkisling · « **Reply #4 on:** October 14, 2005, 09:56:00 PM »

GOOD theres still hope, I will do that right now and post to tell you how that goes

jkisling · « **Reply #5 on:** October 14, 2005, 10:10:00 PM »

How long does it take?? I made the Eurasia Generic Pro Flash Disc 1.2. I put it in when the cd came out then pressed a now it is just sitting at the cromwell screen and I hear it reading the cd..

benskigomez · « **Reply #6 on:** October 14, 2005, 10:17:00 PM »

Did you make a bios cd? Make sure your bios is 512k and named "bios.bin". Use XBTool to resize if needed.

jkisling · « **Reply #7 on:** October 14, 2005, 10:21:00 PM »

o so do I put the bios on with it??

benskigomez · « **Reply #8 on:** October 14, 2005, 10:23:00 PM »

No. Create a seperate CD for the bios. Try this guide to create the CD in Nero http://www.teamxecuter.com/flashbios/cd.htm .

jkisling · « **Reply #9 on:** October 14, 2005, 10:28:00 PM »

ok well thats what i am trying to say when i put the Eurasia Generic Pro Flash Disc 1.2 it just sits there reading it.....I have a bios disk do i put that in first or what..

I only get bank 1 bank 2 just sits at a blue screen with the eject button flashing

This post has been edited by jkisling: Oct 15 2005, 05:35 AM

jkisling · « **Reply #10 on:** October 14, 2005, 11:25:00 PM »

I put the eurasia cd i made in cromwell 2.32 menu and it just sits there reading the disk what am I doing wrong?

HackDaBox · « **Reply #11 on:** October 17, 2005, 07:23:00 AM »

Try different media. Try burning to DVD-R instead of CDRW. Try dvd decypter or Nero burning rom.

HackDaBox !

Author Topic: Duo X2 Flash Bios Problem Plz Help (Read 96 times)