xboxscene.org forums

Author Topic: Duox2 Problem  (Read 64 times)

reststop

  • Archived User
  • Newbie
  • *
  • Posts: 2
Duox2 Problem
« on: July 29, 2005, 08:19:00 AM »
Just a little more info, I dont seem to get any video on tv at all, just the front LED flashing 3 times accompanied by 3 whirring sound then the red and green lights.  Should I see anything on the sceen.  All new to me , thanks again.

rest
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Duox2 Problem
« Reply #1 on: July 29, 2005, 10:27:00 PM »

It sounds like you have a solder splash somewhere on the board. Don't remove the headerpin yet , just use a mag glass to look very carefully and slowly ( you can't rush this process. Sunlight is best !

Use solder wick to remove any ssplashes . You simply put the wick on the solder splash and then put your clean hot iron on the wick and the solder will run up the wick !

HackDaBox !

www.HackDaBox.com

Logged