Topic: Duox 2 Cromwell/flashbios Edition (Read 114 times)

KDragon · « **on:** July 17, 2005, 10:06:00 PM »

ok i have a 1.6 and read all the stuff i could find but still have no ideas. if i press eject the xbox boot M$ Just fine but if i use the power button to boot Cromwell the xbox reboots 3 times then flashes red and green with the mod flashing red.I know the "BT" wire is fine and have no reason to beleve "D0"is bad. BUt i will try in the am in the mean time if any one has any ideas let me know. P.S. i tryd both banks

KeyMastur · « **Reply #1 on:** July 17, 2005, 10:08:00 PM »

has to do with your solder. recheck.

did you rebuild lpc ?

Chancer · « **Reply #2 on:** July 18, 2005, 10:12:00 AM »

D0 and BT are indeed working. the problem is LPC related. Either bad connections on the LPC pins or on the rebuild

KDragon · « **Reply #3 on:** July 18, 2005, 11:39:00 AM »

Thanks for the input im looking at the solder now

KDragon · « **Reply #4 on:** July 18, 2005, 09:38:00 PM »

Chancer · « **Reply #5 on:** July 19, 2005, 07:17:00 AM »

Is the bank switch fully accross it looks to be sat halfway, but it may be an optical illusion

KDragon · « **Reply #6 on:** July 19, 2005, 09:04:00 AM »

KDragon · « **Reply #7 on:** July 19, 2005, 10:53:00 AM »

I just noticed this solder blob on the DuoX2's TSOP and idont know if it shoud be there. Heres a pic.
user posted image

Chancer · « **Reply #8 on:** July 19, 2005, 01:02:00 PM »

yes its there on the blue ones so will be there on the white

KDragon · « **Reply #9 on:** July 19, 2005, 04:14:00 PM »

can any one see a problome with any of my soldering? if not how likly is it that i just have a dead chip?

jaydon34 · « **Reply #10 on:** July 19, 2005, 04:18:00 PM »

could be possible ive had dead duox's. But purchase them from appleguru his chips are legit.

Chancer · « **Reply #11 on:** July 20, 2005, 05:19:00 AM »

I think you are at the point where you need to try another chip

KDragon · « **Reply #12 on:** July 20, 2005, 11:42:00 AM »

Thanks for pointing out the clone thing i have to buy a new chip

ModdingManiac · « **Reply #13 on:** July 20, 2005, 02:30:00 PM »

Try "jumping" the switch by connecting a wire on one sice of the swith so it forces it to boot to a specific bank (i've had bad switches on 2-3 i've done)

Author Topic: Duox 2 Cromwell/flashbios Edition (Read 114 times)