xboxscene.org forums

Pages: [1] 2

Author Topic: Doux2 Lite  (Read 157 times)

_GhOsT_

  • Archived User
  • Hero Member
  • *
  • Posts: 736
Doux2 Lite
« on: July 14, 2005, 04:44:00 PM »
how would i go about making a activity led for the doux2 lite?
the doux2 blue and white both have these and i think it would be cool for the lite to have one also. would i just use points on the pinheader (chip side) ?
Logged

_GhOsT_

  • Archived User
  • Hero Member
  • *
  • Posts: 736
Doux2 Lite
« Reply #1 on: July 14, 2005, 06:44:00 PM »
none of those help for what i want to do
Logged

_GhOsT_

  • Archived User
  • Hero Member
  • *
  • Posts: 736
Doux2 Lite
« Reply #2 on: July 14, 2005, 07:37:00 PM »
1. im not lookin for a hd activity led
2. it says in my first post "how would i go about making a activity led for the doux2 lite?
the doux2 blue and white both have these" you know how there is a light on the chip
i want to make a light that goes on an flashes when the chip is on
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Doux2 Lite
« Reply #3 on: July 15, 2005, 04:13:00 AM »

Well the DuoX2 Blue and White both have 2 512k banks and a RED flashing LED and cost around $2 more

The DuoX2 Lite has only 1 512k bank and No LED and is around $2 cheaper !

Now are you serious ? you saved like $2 but now want to add your own LED to tell you the chip is on ?

You can connect a flashing led to pin 2 ground and pin 6 5v and it will flash all the time , it doesn't matter if the chip is on or off but you cant add a LED that will flash only when the chip is on as this needs to be driven from the CPLD code on the modchip itself ... for this pay the extra $2

HackDaBox !

Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Doux2 Lite
« Reply #4 on: July 15, 2005, 11:11:00 AM »
I personally would just buy a duox2. I can't see why you would buy a lite if does not have the features you want. the difference in price is negligible
Logged

hippo

  • Archived User
  • Sr. Member
  • *
  • Posts: 497
Doux2 Lite
« Reply #5 on: July 15, 2005, 03:29:00 PM »
LPC 6-----------------LED-----/\/\/\/\(220)------------ D0

D0 goes to ground when mods is enabled completing the circuit from 5v on pin 6.

Everyone who answered this to this point just got an F in the gradebook. Step away from the soldering iron please don't touch any more Xboxes.
Logged

appleguru

  • Archived User
  • Hero Member
  • *
  • Posts: 1200
Doux2 Lite
« Reply #6 on: July 15, 2005, 10:33:00 PM »
QUOTE(otherguy @ Jul 15 2005, 10:02 PM)
right d0 goes to ground when chip is enabled....  but what level(s) does d0 run at while the chip is disabled
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Doux2 Lite
« Reply #7 on: July 16, 2005, 06:26:00 AM »
According to an earlier post by Hippo D0 sits at 1.2V when the chip is enabled its not grounded. I think he mentioned that another 0.4v higher and the chip would not work.
Logged

hippo

  • Archived User
  • Sr. Member
  • *
  • Posts: 497
Doux2 Lite
« Reply #8 on: July 16, 2005, 06:19:00 PM »
Grade changed to F MINUS for arguing with the teacher.
If you wanted further discussion about that post why did you lock the thread? Why must you always bicker? And this is all you have to say for yourself?
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Doux2 Lite
« Reply #9 on: July 16, 2005, 06:33:00 PM »
QUOTE
If you wanted further discussion about that post why did you lock the thread?

This is about this thread. You stated previously, cannot remember the thread exactly about the voltages, now you say its ground? will this method still work withe D0 sat at 1.2v?
QUOTE
Why must you always bicker?

QUOTE
Grade changed to F MINUS for arguing with the teacher.

Do you really need to ask that question.
 Also you have a rather high opinion of yourself if you think you are my teacher.


Logged

otherguy

  • Archived User
  • Sr. Member
  • *
  • Posts: 294
Doux2 Lite
« Reply #10 on: July 16, 2005, 06:49:00 PM »
QUOTE(appleguru @ Jul 16 2005, 12:44 AM)
Doesn't matter, it's not ground biggrin.gif hippo's solution should work just fine smile.gif
Logged

_GhOsT_

  • Archived User
  • Hero Member
  • *
  • Posts: 736
Doux2 Lite
« Reply #11 on: July 16, 2005, 11:52:00 PM »
wow
 see the arguement that has happend from just one question
i have 15 red leds laying around and i wanted to just try something different and put a activity led on a duox2 lite
i just wanted to know how if it was possible
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Doux2 Lite
« Reply #12 on: July 17, 2005, 03:06:00 AM »
Ghost you could always temporary wire one in and see how it behaves.
You could connect via a 100R resistor to pin 14 of the cpld chip and ground (Pin 2)
So it would be
Pin2-------LED------100R------Pin14 CPLD
I will double check the number again in 10 minutes. If I could count  it would help
Logged

_GhOsT_

  • Archived User
  • Hero Member
  • *
  • Posts: 736
Doux2 Lite
« Reply #13 on: July 17, 2005, 11:57:00 AM »
pin 14 of the cpld chip
is that on the chip itself or somewhere else? could you show a pic of this spot
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Doux2 Lite
« Reply #14 on: July 17, 2005, 12:24:00 PM »
I don't have a large picture of the chip yet. From pin 1 just count 14 to the right or email me a large clear pic and I will add the use ful bit on to it and repost it.
Logged
Pages: [1] 2
« previous next »