xboxscene.org forums

Pages: 1 [2] 3

Author Topic: Duox2 Just Died  (Read 198 times)

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #15 on: June 27, 2005, 10:22:00 AM »
HackDaBox
Yes the motherboard is back to an oem status minus the fragging. I did went through the board and founch some splashes but not the one that is given me the error yet. I will get me a camera today or scan and post. Thank you bro

God bless
Jcupp114
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #16 on: June 30, 2005, 06:11:00 AM »
sad.gif ***********************Update status********************* sad.gif
I placed the pin head on board soldered it on, then the pin head on the duox2 chip. Everything seemed well. Then I connected the D0 from the v1.0 to ground. Then the BT on chip to stay on at all times.  beerchug.gif right!!! So I checked and put everything back inside the xbox.
Booted.... Then got the 3boot with red/green.
So I pulled the D0 from ground and the xbox booted normal as the chip flashed its red led as working status.
My question is what do I try next. Is it the lpc solder job thats bad? Should I find alt 1.0-1.1 D0 point to solder to. Any feedback would be really awesome. Thank you in advance. Take care
jcupp114
Logged

antz1970

  • Archived User
  • Sr. Member
  • *
  • Posts: 386
Duox2 Just Died
« Reply #17 on: June 30, 2005, 06:22:00 AM »
when you ground d0 , you force the xbox to boot from the lpc , if you get a frag it means your d0 to ground wire is fine and 9/10 it is a problem with the lpc soldering(the fact that the red light flashes only means your ground and 3v connections are correct , what i would do is use a fibreglass pen on the lpc , then resolder all the connections
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #18 on: June 30, 2005, 07:02:00 AM »
If you could please explain that process if you would. Thank you.
Jcupp114
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #19 on: June 30, 2005, 12:13:00 PM »
laugh.gif
If anyone has any suggestions please let me know

Thank you for your time.
GOD BLESS
Jcupp114
Logged

gundamhr

  • Archived User
  • Jr. Member
  • *
  • Posts: 66
Duox2 Just Died
« Reply #20 on: June 30, 2005, 11:23:00 PM »
hey, i figured this out the hard way, but if you tighten all the screws too tight, then the m odchip won't boot sometimes, this isn't a fact or anything, but i thought it would help.
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #21 on: July 01, 2005, 12:10:00 AM »
biggrin.gif check the lpc  dry.gif ckeck it sad.gif and your right
 beerchug.gif
I also see now that somehow my duox2 white did a number 2 on my xbox and needs some reflash assistance. Hope its fixable. I have a little bit of spec as to how to boot it if one does not might.  grr.gif

Take care
Jcupp114

GOD BLESS
 
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Duox2 Just Died
« Reply #22 on: July 01, 2005, 07:51:00 AM »
beerchug.gif

otherguy or LepPper can help with a hotswap !

HackDaBox !
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #23 on: July 01, 2005, 08:43:00 AM »
O-YA
Glad have the scene to pull information from. Awesome resource of information and people (minds).

The LPC was dirty (solder splashes) which under a mag... glass showed the two traces bridged. Once it was removed it I had a working xbox.

However, I did flash a duox2 white as your tutorial said and let a friend mod his xbox with it, however, when he returned it the chip would not work.
I believe it to be a bios issue. I HOPE!
I will setup a 1.0 with D0 on ground tonight and bridge the bt and g on chip to see if would work.
Take care and GOD BLESS

Jcupp114
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #24 on: July 01, 2005, 11:42:00 PM »
got a duox2 chip that will function right! I got the chip ready for flash hardswap. Yet it tells me that the chip is invalid. What may be the problem? Anyone?

And if the chip is messed up. Where can I get 2 duox2's for 10.00 a piece?

Take care
Jcupp114
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Duox2 Just Died
« Reply #25 on: July 02, 2005, 06:46:00 AM »
smile.gif

Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #26 on: July 04, 2005, 05:23:00 PM »
I have the bt and 9 pin conneted and the D0 to ground. I booted the cromwell and switched the chips and got an error invaild statement. I switched the bank and got it again with eurasias pro disk.
Any ideas or can someone be so kind as to reflashing the chip? Take care and GOD BLESS
Jcupp114
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #27 on: July 04, 2005, 05:36:00 PM »
Also, could anyone tell if they have any original duox lites for 9.00? I need two! Take care.
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #28 on: July 05, 2005, 10:01:00 AM »
bump for feedback on this.

Take you for your time and GOD BLESS

Jcupp114
Logged

jcupp114

  • Archived User
  • Full Member
  • *
  • Posts: 237
Duox2 Just Died
« Reply #29 on: July 05, 2005, 02:06:00 PM »
Sorry, your right on the buying.
Could someone diagnose this.

I have the bt and 9 pin conneted and the D0 to ground. I booted the cromwell and switched the chips and got an error invaild statement. I switched the bank and got it again with eurasias pro disk.
Error was unknown chip or ...... at dev 0*ff and man0*ff
So I entered in the string into the raincoat cfg file and tryed again and got another error
error at 0*0 wrote at 0*09 read at 0*ff

Any ideas or can someone be so kind as to reflashing the chip? Take care and GOD BLESS
Jcupp114
Logged
Pages: 1 [2] 3
« previous next »