Topic: Duox2 Won't Install (Read 129 times)

HackDaBox · « **Reply #15 on:** June 24, 2005, 08:29:00 AM »

You have to solder it to a leg of one of the chips so be carefull OK.

user posted image

HackDaBox !

Master Bman · « **Reply #16 on:** June 24, 2005, 08:35:00 AM »

ok, right now i have bt on chip to g on chip and d0 on mobo to screwhole metal. if i hit the on or eject button it turns on and off 3 times then frags. any ideas?

mabe its cuz the M$ dash is messed?

HackDaBox · « **Reply #17 on:** June 24, 2005, 08:41:00 AM »

Flick the bank switch and try to boot with power !

resolder the female pinheader to the chip , just heat up each point and add a touch of solder !

Does the RED Led flash ?

Do you have it on the headerpin the right way ? the bank switch should be close to the left side of the xbox !

follow my DuoX2 Troubleshooter !

HackDaBox !

Master Bman · « **Reply #18 on:** June 24, 2005, 04:43:00 PM »

novakpower · « **Reply #19 on:** June 24, 2005, 06:01:00 PM »

Here's a picture of a Duo I had setup for always on. Nothing gets soldered to D0 on the Duo.

user posted image

--DANNY-- · « **Reply #20 on:** June 24, 2005, 07:27:00 PM »

QUOTE(novakpower @ Jun 24 2005, 06:12 PM)

So if BT is connected to that pin (i think that's pin 9), then you don't need to connect the D0 or anything else to anything? That's all that's needed, and it will just always be enabled?

-Danny

Master Bman · « **Reply #21 on:** June 24, 2005, 10:40:00 PM »

no from what i understand you then have to connect d0 on the mobo to ground, such as a screw hole.

HackDaBox · « **Reply #22 on:** June 24, 2005, 11:17:00 PM »

Master Bman is correct. You still have to ground mobo D0. Easiest way is to solder a wire from the backside d0 point and bring it up through a spare lpc hole #15 or #16 then solder it to the round metal circle that goes around the screw hole near the lpc area.

In this setup the eject button will also boot the hacked BIOS and xbox live is not an option. This is good for testing and troubleshooting but once everything is working you should remove the link from the chip and move the wire from the screw hole to the chips D0 point. Then solder a wire from the chips BT point to the alternate BT point.

HackDaBox !

Master Bman · « **Reply #23 on:** June 25, 2005, 10:37:00 AM »

does anyone live around upstate ny some kind of guru? i am so sure i ahve this set up correctly and it just doesnt work. i ahve tried 2 chips with 2 boxes and they don't work, it makes no sense. i know the chip is always on but when i boots it doesnt do what its supposed to do. instead of doing anything at all it starts once for about a second, shuts off. does it again two more tiems then stays on and frags. the whole time the screen on the tv is balck with no audio. sucks.

HackDaBox · « **Reply #24 on:** June 25, 2005, 11:12:00 PM »

Master Bman · « **Reply #25 on:** June 28, 2005, 06:12:00 AM »

hey hackdabox, i'll get the pics up soon but i was wondering if you were having trouble with your server? if you want a real server/domain name i can help out (at like chep to free) so shoot me an email or pm if your at all interested or curious. no promises, but i'd like to help.
bman

pixelsss · « **Reply #26 on:** July 01, 2005, 09:12:00 AM »

Edited By Chancer
This is the second post you have Hijacked. Please start your own thread if you have a question. Also read the rules

Author Topic: Duox2 Won't Install (Read 129 times)