Topic: Bad Flash Doux2 Lite (Read 65 times)

census007 · « **on:** June 13, 2005, 12:39:00 AM »

i think a hot would be best.
chancer's hot swap giuide.

HackDaBox · « **Reply #1 on:** June 13, 2005, 01:41:00 AM »

Congratulations ... your the first noob to bad flash a Duox2 lite

You can use any LPC based modchip to perfrom the hotswap

so yes the Duox2 will be fine !

This time flash with X2 4981.06 512k OK

HackDaBox !

GEQ · « **Reply #2 on:** June 13, 2005, 07:34:00 AM »

I may try that ze_olc. I knew the iND bios had problems with certairn video chips, but thought it was fine for a v 1.0 board. The main stupidity was patching the bios my own config file in at 1 am without testing it on the HD first. Sometimes I have to learn the hard way.

The evox bios that came on the chip just hung at the splash screen. Fortunately the box was already softmodded and quick evox flash with 4981.06 fixed it the first time around. Of course I could not leave well enough alone.

.:Dino:. · « **Reply #3 on:** June 13, 2005, 07:43:00 AM »

good old 4981, its all good, no crap jus a nice simple 512kb of love, and its customizable

novakpower · « **Reply #4 on:** June 13, 2005, 09:36:00 AM »

I think he got carried away because this was a Duo thread. I'm sure he will realize he meant 256k.

HackDaBox · « **Reply #5 on:** June 13, 2005, 09:44:00 AM »

Well we are talking about bioses for a DuoX2 so yeah the size would need to be 512k becuase some flashers don't autosize. However i do realize it can be used as 256k otherguy

HackDaBox !

HackDaBox · « **Reply #6 on:** June 14, 2005, 01:01:00 AM »

Argh well you should not of killed a chip by hotswaping ? did you remember to replace the good chip with the bad chip before flashing

i guess your best option is to send both chips to some niceguy close to you that can hottswap flash the chips for you !

HackDaBox !

Chancer · « **Reply #7 on:** June 14, 2005, 06:36:00 AM »

QUOTE

The box just powers up three times and then frags with either chip.

If it only does this in chip enabled mode then the D0 is not the problem.

ze_olc · « **Reply #8 on:** June 16, 2005, 01:27:00 AM »

any feedback on this one?

GEQ · « **Reply #9 on:** June 21, 2005, 09:25:00 AM »

Update: [I apologize for bringing up an old thread]

ze_olc · « **Reply #10 on:** June 21, 2005, 09:32:00 AM »

QUOTE

I get trusty Eurasia cds out. I boot with the Lite chip in. No video but the box is running. Disc pops out and in goes the second cd of eurasia box shuts down. Reboot box and the chip works fine.

told you to try

Chancer · « **Reply #11 on:** June 21, 2005, 09:45:00 AM »

ze_olc was right in what he said. the good thing about doing it with Eurasia this way is even if you can't see the screen the process is automatic, closing and openeing the DVD etc.
Sounds like your white duo has died

Chancer · « **Reply #12 on:** June 21, 2005, 10:57:00 AM »

QUOTE

Sometimes it better to walk away

That is very true. Its amazing how you can solve something straight away if you have a break from it and come back to it.

Author Topic: Bad Flash Doux2 Lite (Read 65 times)