Topic: Duox 2 White Help (Read 117 times)

otherguy · « **on:** June 08, 2005, 04:29:00 PM »

how do you know that the chip is working or enabled still? The error message you described is only displayed by the default MS dash.
are you sure a hacked bios is loading?

playboydee · « **Reply #1 on:** June 08, 2005, 04:38:00 PM »

Well the modchip is working and loading my bios (EvoX M8) because the red led is flashing and i get the EvoX logo on top.

LepPpeR · « **Reply #2 on:** June 08, 2005, 04:39:00 PM »

that means that the chip is working properly. What dvd drive do you have and what media are you using?

ModdingManiac · « **Reply #3 on:** June 08, 2005, 04:50:00 PM »

It could be the media, different xboxe dvd-rom drives like different medias, they don't all play the same brand of media. Or it could also be your dvd-rom drive (unless it reads originals fine then its not the dvd-rom)..Try swapping dvd-roms with the 1.6, if it works then its most likely the media you are using.

ModdingManiac · « **Reply #4 on:** June 09, 2005, 04:41:00 PM »

QUOTE(playboydee @ Jun 10 2005, 12:47 AM)

Yea, the dvd rom plays regular games with no problem. I dont have my other modded xbox right now, so i cant swap. Could this be a soldering problem??

novakpower · « **Reply #5 on:** June 12, 2005, 08:55:00 PM »

I think its your dvd drive still, try the other drive when you get your modded xbox back. Everything else sounds like its working like it should.

novakpower · « **Reply #6 on:** June 12, 2005, 10:13:00 PM »

There should be an answer here on the forums. If it was me, I would say my chip is working because you get the hacked boot screen. So I would try an X2 bios, since you have a 1.4 box. Worth a shot.

Chancer · « **Reply #7 on:** June 13, 2005, 02:43:00 AM »

Re Do the soldering on the LPC first. a high resistance connection caused by a poor soldered joint can cause this.

Author Topic: Duox 2 White Help (Read 117 times)