xboxscene.org forums

Pages: [1] 2

Author Topic: Duox2  (Read 195 times)

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« on: March 19, 2005, 10:10:00 PM »
Hi i am going to order this chip from chipdealer.com wheres the diagram for it on the 1.6 it doesn't show where i solder the points it only shows the rebuild lpc port and pinheader install can i just look at v1.5 for the points for example point a,b,c etc
Logged

LepPpeR

  • Archived User
  • Hero Member
  • *
  • Posts: 1681
Duox2
« Reply #1 on: March 19, 2005, 10:13:00 PM »
I sell them for $2.95 cheaper but here is the install diagram

http://www.duomodchi..._white_v1.6.jpg

http://shop.craxtion.com
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #2 on: March 19, 2005, 11:13:00 PM »
chipdealer has a blue one whats the differance ??? also are these good chips for noobs to install ? this is my first time ever installing a chip
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #3 on: March 19, 2005, 11:40:00 PM »
also should i buy the  1.6 Rebuild Board for the blue duox2 ??
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Duox2
« Reply #4 on: March 20, 2005, 05:49:00 AM »
The blue one comes with a hacked bios on and the white comes with Legal cromwell on. Both can be re-flashed and both are the same to install in the box. I would wire the rebuild in rather than use the rebuild board.
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #5 on: March 20, 2005, 12:39:00 PM »
also do i need to appy solder to the points or is there enough already so i can just heat the point up and put the wire there
Logged

ModdingManiac

  • Archived User
  • Hero Member
  • *
  • Posts: 653
Duox2
« Reply #6 on: March 20, 2005, 12:45:00 PM »
You need to put solder.
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #7 on: March 20, 2005, 01:03:00 PM »
ok for the pinheader part when u put it through the chip should i just put the solder iron of top of it to melt it ?? or appy solder ? this part
user posted image

o and i emailed chipdealer they said duox2 doesn't work with v1.6 or 1.6b xboxs this is what he said...

"Unfortunately, it's designed for V1.0 to V1.5. To use it on V1.6 or V1.6b
you will need additional parts not included or supported."  

what do i need to make it work on a v1.6 or v1.6b xbox ?? please help sorry for the noob questions.
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Duox2
« Reply #8 on: March 20, 2005, 01:33:00 PM »
QUOTE
duox2 doesn't work with v1.6 or 1.6b xboxs this is what he said..

chipdealer are talking crap total crap. Of course they work on the 1.6 and 1.6b.
Bearing in mind what they said and obviously know nothing is it wise to buy from them.
Buy your chip from LepPpeR you can trust him and trust his advice completely and he is cheaper.
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #9 on: March 20, 2005, 02:35:00 PM »
does he ship to canada and also his chip is the white one.. one more thing do i just put the solder iron on the pins and let it melt or do i appy solder ? (the picture above)
Logged

LepPpeR

  • Archived User
  • Hero Member
  • *
  • Posts: 1681
Duox2
« Reply #10 on: March 20, 2005, 03:58:00 PM »
Yes I ship to Canada.

If you want, I will install the pin-headers on the chip, no charge.  Like the picture you have above.

LeP


note:  Chipdealer.com has no idea what they are talking about.  The chip works on all console versions.  1.0 to 1.6A/B.

If you have a 1.6 I recommend getting the LPC Rebuild Board, its 5.00 Bucks and saves you a lot of hassle.
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #11 on: March 20, 2005, 04:06:00 PM »
WOW you are a nice guy... k i will give u my order number and name when i place the order so if i buy the lpc rebuild port what do i need to do ?? all i need to do is the do point and the bst or something point and i am done (since ur doing the pinheader for me) ???
Logged

LepPpeR

  • Archived User
  • Hero Member
  • *
  • Posts: 1681
Duox2
« Reply #12 on: March 20, 2005, 04:19:00 PM »
The rebuild board goes on the bottom of the motherboard, installs pretty easy with just a tiny bit of solder.

Once you have that done and the pinheader installed into the LPC holes you solder the D0 to the chip and the BT.

Flash the correct bios and your done wink.gif

sounds hard but is pretty easy if you know what you are doing.  If you are not good at soldering I suggest you practice on old circuit boards as I did.
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Duox2
« Reply #13 on: March 20, 2005, 04:24:00 PM »
If you use the rebuild board then all you have is a wire from the Lframe point to D0 on the chip and the BT point. the link in my signature has a guide to the Alternate BT point and if you need guiding through flashing it just post back on here
Logged

jitster

  • Archived User
  • Sr. Member
  • *
  • Posts: 299
Duox2
« Reply #14 on: March 20, 2005, 04:26:00 PM »
i don't understand how to do the Do point i looked on ur site still confused do i just put it in the hole ?? LOL
Logged
Pages: [1] 2
« previous next »