Topic: Replacing An Aladdin With A Duox2 (Read 102 times)

ModdingManiac · « **on:** March 16, 2005, 06:23:00 PM »

Different Chips = Different Points..You will need to desolder the wire. It won't work.

LepPpeR · « **Reply #1 on:** March 16, 2005, 06:24:00 PM »

You can try it, The BT point on the DUOX2 is really simple though.

ModdingManiac · « **Reply #2 on:** March 16, 2005, 06:29:00 PM »

QUOTE(iconian @ Mar 17 2005, 01:33 AM)

i thought that may be the case but had to ask....

Unseen Shadow · « **Reply #3 on:** March 17, 2005, 09:54:00 AM »

....sorry man i dont think you stuffed the ms bios, as you would of had to enable the tsop write jumpers.....and effed up the flash for that to happen. I would say u may have stuffed the eeprom....or u just dont have the ms dash on there anymore.....if thats the case just re install it with ur autoinstaller disc of choice

Chancer · « **Reply #4 on:** March 17, 2005, 10:17:00 AM »

The BT points are different, as the method of enabling the chip is different in each case. The ALT points are on my site.
I don't think you erased the M$ bios either. Defo reinstall the m$ dash before going further.

HackDaBox · « **Reply #5 on:** March 17, 2005, 11:42:00 PM »

Remove all chips and try to get normal ms bios and ms dash booting brfore trying anything else !

HackDaBox !

ModdingManiac · « **Reply #6 on:** March 17, 2005, 11:56:00 PM »

QUOTE(iconian @ Mar 18 2005, 06:56 AM)

Still get the same LED flases RED and i get no video init at all

iconian · « **Reply #7 on:** March 18, 2005, 12:25:00 AM »

If it was the bios a replacement chip would fix that right?

If it is the eeprom how would i fix?

Matthew

Author Topic: Replacing An Aladdin With A Duox2 (Read 102 times)