xboxscene.org forums

Author Topic: Duox2 Ftp  (Read 116 times)

sbmd

  • Archived User
  • Full Member
  • *
  • Posts: 102
Duox2 Ftp
« on: March 06, 2005, 05:57:00 PM »
no, i believe you do need to boot up a cd.
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Duox2 Ftp
« Reply #1 on: March 06, 2005, 06:47:00 PM »
OK. So when you boot using the power button does it say xecuter under the x logo ? if yes then the chip is working and it must be a problem with your boot disc.

Try burning it onto a DVD-R if you can as i have had better success with them over CDRW. Are you making an xbox iso before burning using Qwix or similar ?

No you can't use ftp with MS DASH you must get Evox Dashboard working first.

HackDaBox !
Logged

Chancer

  • Archived User
  • Hero Member
  • *
  • Posts: 5751
Duox2 Ftp
« Reply #2 on: March 07, 2005, 05:34:00 AM »
Depending where you obtained the Dash files make sure to change evoxdash.xbe to default.xbe before you make the Xiso. It has to be named default to boot off the disc.
Logged

munkle

  • Archived User
  • Full Member
  • *
  • Posts: 129
Duox2 Ftp
« Reply #3 on: March 07, 2005, 06:54:00 PM »
tongue.gif  you can try a pot tweak i did on mine so it could read the cdrw, some say pot tweaking can mess them up i havent noticed anything so far, but you never know do it at your own rick
Logged

HackDaBox

  • Archived User
  • Hero Member
  • *
  • Posts: 885
Duox2 Ftp
« Reply #4 on: March 07, 2005, 07:11:00 PM »

Try DVD-R it should fix your trouble. If it still doesn't work then it's not the pot as there are 2 pots one for the DVD laser and one for the CD laser.

HackDaBox !

Logged

[email protected]

  • Archived User
  • Newbie
  • *
  • Posts: 3
Duox2 Ftp
« Reply #5 on: March 08, 2005, 10:15:00 PM »
ok i have another question for this thread... do i need to remove pogo pins?
Logged

otherguy

  • Archived User
  • Sr. Member
  • *
  • Posts: 294
Duox2 Ftp
« Reply #6 on: March 09, 2005, 12:27:00 AM »
QUOTE
ok i have another question for this thread... do i need to remove pogo pins?

You shouldn't have pogo pins if you have a duox2....  regardless...  if the chip is booting the bios, dont touch it. ITS WORKING, YOU'RE NOT
Logged

munkle

  • Archived User
  • Full Member
  • *
  • Posts: 129
Duox2 Ftp
« Reply #7 on: March 09, 2005, 12:41:00 AM »
why not try slayers all you have to do is burn it at disc at once finalized
Logged