Print

[munkle]

maybe its the cd or dvd its burned on, dont use cd-r and try different brands and burn on a low speed on a new not erased disk, not sure if thats it, hopefully this helps

[DanoruX]

I used dvd-r to burn eurasia... and the exact same kind to do a bios disc. Doesn't work. Like I said... it wants me to put the device id in raincoat.cfg,and I have no clue what it is...

Btw, Is it normal for duox2 to show read-only in flashbios? I'm pretty sure somethings not right here >_<

[DanoruX]

Anybody?

[Chancer]

In the Eurasia disc folder when you download it there is a file called Raincoat. Open it with notepad and make sure it has the following lines (not all are required but it may be an older version)
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000

If they are missing paste them in using notepad, save the file and reburn the boot disc with the new entries.
If this does not work then you are doing something else wrong or maybe the chip is faulty.
I have flashed 2 duoX2 today ( white) using Eurasia and confirm it works fine. Both these boxes were brought in by customers who had fitted their own DuoX2 but could not get the flash to work. If you want the full list from my config file you can have it. Let me know

[DanoruX]

help T_T

[DanoruX]

Is there any chance it could be the soldering?

[Chancer]

Sorry I just re-read the post and the damn lines are missing the ;  at the end. add the ; to the end of each line. (thanks hackadabox for picking it up for me)
Sorry its when I drag to copy and paste.
From the error it would appear its not recognising the chip. Is the flash rom the usual AMD type?

[DanoruX]

Difficult problem... eh?

[sjoer]

I'm having the same problems with a Duo X2, it won't flash in either my own (X3 modded V1.1) or in the new to install V1.5!

I tried messing with lines, as I now what I was doing!
No sucess


I re-soldered the whole damn thing and no sucess.

Could it be some write protect line that is somehow high?

[HackDaBox]

I know some people prevent you from flashing the SST chip by linking some pins on it. Where did you order the chip from ?  If you have another xbox you could try hotswaping the modchip.

HackDaBox !

[Chancer]

Works ok with the dashes in when I tried it on a white DuoX2 AMD chip also.Raincoat 0.5 CFG file it was. what do the dashes signify?
Have you cured this yet? I would have hotswapped out the chip even if I had to borrow a box by now

[Chancer]

Right got it.
why are people having such problems flashing the White DuoX2 then if the Flash Id is already present in 0.5. In fact the AMD flash ID is present in the config file that came standard with Eurasia when I checked.

[HackDaBox]

I just grabbed the raincoat.conf file from raincoat .7 and renamed it to raincoat.cfg so it's compatible with Eurasia Pro Generic Flash Disc 1.2 But the other problem is that raincoat .5 and Eurasia Pro can only read the first 31 lines and the rest is ignored !

So i have moved some important lines to the top to make sure it's going to work.

Here is the working file

Cut and paste and save as raincoat.cfg and burn on your bios disc.

Flash = 0xdab0,"Winbond W49V002A",0x40000
Flash = 0xbf61,"SST 49LF020",0x40000
Flash = 0xbf52,"SST 49LF020A",0x40000
Flash = 0x01b0,"AMD Am29F002BT/NBT",0x40000
Flash = 0x0134,"AMD Am29F002BB/NBB",0x40000
Flash = 0x0151,"AMD Am29F200BT",0x40000
Flash = 0x0157,"AMD Am29F200BB",0x40000
Flash = 0x0140,"AMD Am29LV002BT",0x40000
Flash = 0x01c2,"AMD Am29LV002BB",0x40000
Flash = 0x013b,"AMD Am29LV200BT",0x40000
Flash = 0x01bf,"AMD Am29LV200BB",0x40000
Flash = 0x010c,"AMD Am29DL400BT",0x80000
Flash = 0x010f,"AMD Am29DL400BB",0x80000
Flash = 0x0177,"AMD Am29F004BT",0x80000
Flash = 0x017b,"AMD Am29F004BB",0x80000
Flash = 0x01a4,"AMD Am29F040B",0x80000
Flash = 0x0123,"AMD Am29F400BT",0x80000
Flash = 0x01ab,"AMD Am29F400BB",0x80000
Flash = 0x01b5,"AMD Am29LV004BT",0x80000
Flash = 0x01b6,"AMD Am29LV004BB",0x80000
Flash = 0x014f,"AMD Am29LV040B",0x80000
Flash = 0x01b9,"AMD Am29LV400BT",0x80000
Flash = 0x01ba,"AMD Am29LV400BB",0x80000
Flash = 0x014a,"AMD Am29DL800BT",0x100000
Flash = 0x01cb,"AMD Am29DL800BB",0x100000
Flash = 0x01d5,"AMD Am29F080B",0x100000
Flash = 0x01d6,"AMD Am29F800BT",0x100000
Flash = 0x0158,"AMD Am29F800BB",0x100000
Flash = 0x013e,"AMD Am29LV008BT",0x100000
Flash = 0x0137,"AMD Am29LV008BB",0x100000
Flash = 0x0138,"AMD Am29LV080B",0x100000
Flash = 0x01da,"AMD Am29LV800BT/DT",0x100000
Flash = 0x015b,"AMD Am29LV800BB/DB",0x100000

Flash = 0x378c,"AMIC A29002T/290021T",0x40000
Flash = 0x370d,"AMIC A29002U/290021U",0x40000
Flash = 0x3786,"AMIC A29040A",0x80000
Flash = 0x37b0,"AMIC A29400T/294001T",0x80000
Flash = 0x3731,"AMIC A29400U/294001U",0x80000
Flash = 0x3734,"AMIC A29L004T/A29L400T",0x80000
Flash = 0x37b5,"AMIC A29L004U/A29L400U",0x80000
Flash = 0x3792,"AMIC A29L040",0x80000
Flash = 0x370e,"AMIC A29800T",0x100000
Flash = 0x378f,"AMIC A29800U",0x100000
Flash = 0x371a,"AMIC A29L008T/A29L800T",0x100000
Flash = 0x379b,"AMIC A29L008U/A29L800U",0x100000

Flash = 0x04b0,"Fujitsu MBM29F002TC",0x40000
Flash = 0x0434,"Fujitsu MBM29F002BC",0x40000
Flash = 0x0451,"Fujitsu MBM29F200TC",0x40000
Flash = 0x0457,"Fujitsu MBM29F200BC",0x40000
Flash = 0x0440,"Fujitsu MBM29LV002TC",0x40000
Flash = 0x04c2,"Fujitsu MBM29LV002BC",0x40000
Flash = 0x043b,"Fujitsu MBM29LV200TC",0x40000
Flash = 0x04bf,"Fujitsu MBM29LV200BC",0x40000
Flash = 0x040c,"Fujitsu MBM29DL400TC",0x80000
Flash = 0x040f,"Fujitsu MBM29DL400BC",0x80000
Flash = 0x0477,"Fujitsu MBM29F004TC",0x80000
Flash = 0x047b,"Fujitsu MBM29F004BC",0x80000
Flash = 0x04a4,"Fujitsu MBM29F040C",0x80000
Flash = 0x0423,"Fujitsu MBM29F400TC",0x80000
Flash = 0x04ab,"Fujitsu MBM29F400BC",0x80000
Flash = 0x04b5,"Fujitsu MBM29LV004TC",0x80000
Flash = 0x04b6,"Fujitsu MBM29LV004BC",0x80000
Flash = 0x04b9,"Fujitsu MBM29LV400TC",0x80000
Flash = 0x04ba,"Fujitsu MBM29LV400BC",0x80000
Flash = 0x044a,"Fujitsu MBM29DL800TA",0x100000
Flash = 0x04cb,"Fujitsu MBM29DL800BA",0x100000
Flash = 0x04d5,"Fujitsu MBM29F080A",0x100000
Flash = 0x04d6,"Fujitsu MBM29F800TA",0x100000
Flash = 0x0458,"Fujitsu MBM29F800BA",0x100000
Flash = 0x043e,"Fujitsu MBM29LV008TA",0x100000
Flash = 0x0437,"Fujitsu MBM29LV008BA",0x100000
Flash = 0x0438,"Fujitsu MBM29LV080A",0x100000
Flash = 0x04da,"Fujitsu MBM29LV800TA/TE",0x100000
Flash = 0x045b,"Fujitsu MBM29LV800BA/BE",0x100000

Flash = 0xadb0,"Hynix HY29F002",0x40000
Flash = 0xada4,"Hynix HY29F040A",0x80000
Flash = 0xad23,"Hynix HY29F400T/AT",0x80000
Flash = 0xadab,"Hynix HY29F400B/AB",0x80000
Flash = 0xadb9,"Hynix HY29LV400T",0x80000
Flash = 0xadba,"Hynix HY29LV400B",0x80000
Flash = 0xadd5,"Hynix HY29F080",0x100000
Flash = 0xadd6,"Hynix HY29F800T/AT",0x100000
Flash = 0xad58,"Hynix HY29F800B/AB",0x100000
Flash = 0xadda,"Hynix HY29LV800T",0x100000
Flash = 0xad5b,"Hynix HY29LV800B",0x100000

Flash = 0xc2b0,"Macronix MX29F002T/NT",0x40000
Flash = 0xc234,"Macronix MX29F002B/NB",0x40000
Flash = 0xc236,"Macronix MX29F022T/NT",0x40000
Flash = 0xc237,"Macronix MX29F022B/NB",0x40000
Flash = 0xc251,"Macronix MX29F200T",0x40000
Flash = 0xc257,"Macronix MX29F200B",0x40000
Flash = 0xc245,"Macronix MX29F004T",0x80000
Flash = 0xc246,"Macronix MX29F004B",0x80000
Flash = 0xc2a4,"Macronix MX29F040",0x80000
Flash = 0xc223,"Macronix MX29F400T",0x80000
Flash = 0xc2ab,"Macronix MX29F400B",0x80000
Flash = 0xc2b5,"Macronix MX29LV004T",0x80000
Flash = 0xc2b6,"Macronix MX29LV004B",0x80000
Flash = 0xc24f,"Macronix MX29LV040",0x80000
Flash = 0xc2b9,"Macronix MX29LV400T",0x80000
Flash = 0xc2ba,"Macronix MX29LV400B",0x80000
Flash = 0xc2d5,"Macronix MX29F080",0x100000
Flash = 0xc2d6,"Macronix MX29F800T",0x100000
Flash = 0xc258,"Macronix MX29F800B",0x100000
Flash = 0xc23e,"Macronix MX29LV008T",0x100000
Flash = 0xc237,"Macronix MX29LV008B",0x100000
Flash = 0xc238,"Macronix MX29LV081",0x100000
Flash = 0xc2da,"Macronix MX29LV800T",0x100000
Flash = 0xc25b,"Macronix MX29LV800B",0x100000

Flash = 0xb0c9,"Sharp LHF00L02/L06/L07",0x100000
Flash = 0xb0cf,"Sharp LHF00L03/L04/L05",0x100000
Flash = 0x89a2,"Sharp LH28F008SA series",0x100000
Flash = 0x89a6,"Sharp LH28F008SC series",0x100000
Flash = 0xb0ec,"Sharp LH28F008BJxx-PT series",0x100000
Flash = 0xb0ed,"Sharp LH28F008BJxx-PB series",0x100000
Flash = 0xb04b,"Sharp LH28F800BVxx-BTL series",0x100000
Flash = 0xb04c,"Sharp LH28F800BVxx-TV series",0x100000
Flash = 0xb04d,"Sharp LH28F800BVxx-BV series",0x100000

Flash = 0xbf10,"SST 29EE020",0x40000
Flash = 0xbf12,"SST 29LE020/29VE020",0x40000
Flash = 0xbfd6,"SST 39LF020/39VF020",0x40000
Flash = 0xbfb6,"SST 39SF020A",0x40000
Flash = 0xbf57,"SST 49LF002A",0x40000
Flash = 0xbf61,"SST 49LF020",0x40000
Flash = 0xbf52,"SST 49LF020A",0x40000
Flash = 0xbf1b,"SST 49LF003A",0x60000
Flash = 0xbf1c,"SST 49LF030A",0x60000
Flash = 0xbf13,"SST 29SF040",0x80000
Flash = 0xbf14,"SST 29VF040",0x80000
Flash = 0xbfd7,"SST 39LF040/39VF040",0x80000
Flash = 0xbfb7,"SST 39SF040",0x80000
Flash = 0xbf60,"SST 49LF004A/B",0x80000
Flash = 0xbf51,"SST 49LF040",0x80000
Flash = 0xbfd8,"SST 39LF080/39VF080/39VF088",0x100000
Flash = 0xbf5a,"SST 49LF008A",0x100000
Flash = 0xbf5b,"SST 49LF080A",0x100000

Flash = 0x20b0,"ST M29F002T/NT/BT/BNT",0x40000
Flash = 0x2034,"ST M29F002B/BB",0x40000
Flash = 0x20d3,"ST M29F200BT",0x40000
Flash = 0x20d4,"ST M29F200BB",0x40000
Flash = 0x20e2,"ST M29F040 series",0x80000
Flash = 0x20d5,"ST M29F400T/BT",0x80000
Flash = 0x20d6,"ST M29F400B/BB",0x80000
Flash = 0x20f1,"ST M29F080 series",0x100000
Flash = 0x20ec,"ST M29F800DT",0x100000
Flash = 0x2058,"ST M29F800DB",0x100000

Flash = 0xda45,"Winbond W29C020",0x40000
Flash = 0xdab5,"Winbond W39L020",0x40000
Flash = 0xda0b,"Winbond W49F002U",0x40000
Flash = 0xda8c,"Winbond W49F020",0x40000
Flash = 0xdab0,"Winbond W49V002A",0x40000
Flash = 0xda46,"Winbond W29C040",0x40000
Flash = 0xdab6,"Winbond W39L040",0x80000
Flash = 0xda3d,"Winbond W39V040A",0x80000


HackDaBox !

[Chancer]

Right does it need the; at the end of the lines when used in Eurasia. hackdabox you said yes previous. chk2004 says no but in another post a guy flashing the spider could not get the Flash ID to work until he added the ; at the end of it. He confirmed this in his post after trying without and then with.
I never really looked in detail at the lines just used the eurasia proggy so could not say if the lines worked without, I guess probably works both ways but is this the case in Eurasia

[HackDaBox]

Anyway the job is done

HackDaBox !