Topic: Red/green Flashing And No Audio Or Video (Read 181 times)

antz1970 · « **on:** January 23, 2005, 12:04:00 PM »

have you connected the bt wire to behind the eject switch ?, have you connected d0 to the chip or to ground? , more info needed , if you have grounded d0 for "always on" u will need to connect bt to pin9 on the quicksolder pads of the chip(3.3v)

HL_101 · « **Reply #1 on:** January 23, 2005, 12:52:00 PM »

Recheck your solider lpc soldier points.

Liquid_Smoke · « **Reply #2 on:** January 23, 2005, 03:54:00 PM »

I redid all of the lpc solder pionts, they are all good now but the xbox still wouldnt work. I also tried to boot into the second bios on the mod chip but it still didn't work, so now I just took out the mod chip and my xbox works.

Liquid_Smoke · « **Reply #3 on:** January 23, 2005, 04:30:00 PM »

anyone know how to check the modchip to see if it is any good? or check to see if the points are soldered good?

Author Topic: Red/green Flashing And No Audio Or Video (Read 181 times)