Topic: Getting Error 05 When Everything Worked Yesterday... (Read 196 times)

JrracinFan8 · « **on:** February 12, 2006, 12:11:00 PM »

try resoldering your chip maybe the D0 point needs resoldered because if your using an uinlocked drive and its loose your xbox will try to boot from teh TSOP which I am guessing still contains the original untouched bios (never flashed your TSOP>??) Is your chip solderless??

XBOX_Gu_XBOX · « **Reply #1 on:** February 12, 2006, 12:29:00 PM »

Yea my bad, its solderless, and I just checked and the D0 point is connected. Is it possible for it to go too far through the hole maybe???

Something had to happen while it was in transport so Im tryin to think of every little thing that could of gotten slightly knocked outta place.

Not sure exactly which chip it is but I know its a solderless X-Chip and it has a USB hook-up to the chip.

XBOX_Gu_XBOX · « **Reply #2 on:** February 12, 2006, 04:57:00 PM »

Well apparently taking everything apart for the fourth time was the key because it magically works perfectly again.

JrracinFan8 · « **Reply #3 on:** February 12, 2006, 05:35:00 PM »

Yeah thats the bad thing about solderless .. if you move it around alot it will lose alignment and you will have to reseat it so you know what to check if it happens again

tihspeed · « **Reply #4 on:** February 12, 2006, 06:42:00 PM »

you might end up with the same problem again. when you get error five again just just slayers to lock your drive and the problem will go away

Author Topic: Getting Error 05 When Everything Worked Yesterday... (Read 196 times)