Technicalyl speaking the chameleon solderless will not work, unless you have the XChip solderless
D0 wire is same on all solderless adapters and goes to pin #4 on LPC, fix back to original position of wire.
Now if you getting red led on xlite means power which means solderless is xchip solderless as it has pin #6 for 5V power which it needs.
Fix the D0 wire back to original and you should be fine.
BTW the tampering you are referring to is laser etching, that si normal on most preprogrammed chips... just lets manufacturers knos what code on chip and what revisions.
