xboxscene.org forums

Author Topic: Bios Question  (Read 78 times)

[email protected]

  • Archived User
  • Full Member
  • *
  • Posts: 143
Bios Question
« on: October 13, 2004, 06:06:00 PM »
its really up to you..
iv used m8, evox 1.1 evox 1.2 all of em..
its pretty much up to you on what bios u want.
Logged

XmachX

  • Archived User
  • Newbie
  • *
  • Posts: 1
Bios Question
« Reply #1 on: October 13, 2004, 06:23:00 PM »
ok, but which one is most compatible with xbox versions, because i checked in the xbox bios description page and the evox 1.1 and 1.2 looked like they didnt work with the majority of xobx versions.

another question, whats the sequence of events you have to do when modding an xbox. example....  install chip/install bios/install dashboard/install new hd??   is this sequence right?
Logged

Grilf

  • Archived User
  • Jr. Member
  • *
  • Posts: 60
Bios Question
« Reply #2 on: October 13, 2004, 10:44:00 PM »
EvoX M8, EvoX 1.1 and EvoX 1.2 works on all versions of XBOX

With each BIOS there is a seperate file if you have a 1.6 box though.
Logged

cravavr3

  • Archived User
  • Sr. Member
  • *
  • Posts: 279
Bios Question
« Reply #3 on: October 14, 2004, 07:09:00 AM »
Sequence is 2 ways:

Pre-Load Bios on Xchip/install modchip/install new harddrive/install dashboard

or

Install modchip/pre-load bios/install new harddrive/install dashboard
Logged

christineyoung

  • Archived User
  • Sr. Member
  • *
  • Posts: 307
Bios Question
« Reply #4 on: October 14, 2004, 01:33:00 PM »
Actually i would skip the load bios, and verify contact and working with cromwell 1st then use usb cable and program with hacked bios afterwards.
Logged

PaulY^

  • Archived User
  • Newbie
  • *
  • Posts: 45
Bios Question
« Reply #5 on: December 11, 2004, 07:14:00 AM »
Firstly i would suggest you use the evox_xchip v1.3 bios as your core bios on the x-chip , you can load and test many different bioses within the evox xchip 1.3 bios and the possible combinations are many on the empty banks as alternative boots, altho i doubt you will need any other bios atm as the evox x-chip v 1.3 is compatable with all current xboxes. as long as you load the right bin file for the right version xbox.
make sure when you load the 1.3 bios you LOAD RAW and save changes using the x_control software.
Why ppl even bother with M8 or M7 is beyond my comprehension, when the evox xchip v 1.3 is the best bios atm for the x-chip.
Regards PaulY^
Logged