Topic: Reboot Problem. (Read 55 times)

mtxboxfreak · « **on:** October 03, 2004, 04:01:00 AM »

Are you leaving the USB cable in the chip? I found that when I do that the xbox ignores the x-chip and boots as though it isnt there

cravavr3 · « **Reply #1 on:** October 04, 2004, 08:24:00 AM »

Sounds like loose connection, and possible moving the X-Chip when you are reading chip in X-Control.

This is not normal. Also, what version Xbox you are using and are you pressing Eject button whne rebooting?

Saiphox · « **Reply #2 on:** October 04, 2004, 11:16:00 AM »

I have xbox 1.4 or 1.5, and I am using the power button when i turn on my XBOX. I have the m8 bios and evoX. I have checked my connections and nothing is loose.

Maybe it is my set up. Before i started messing with it and I only had cromwell on my chip it would boot fine. But now that i have been screwin around with it, nothing works.

What do you guys have loaded on your x-chip and XBOX?

cravavr3 · « **Reply #3 on:** October 04, 2004, 01:32:00 PM »

I'm using Evox 1.1 and have the xbox original bios mapped to Y button on controller.

Also, I am running a 120 GB locked through Evox 1.1 as well. So will not give me any customer service messages when disabled.

SAETNETA · « **Reply #4 on:** October 05, 2004, 12:07:00 AM »

I had this same problem -- see my intermittent booting. Try totally re-flashing your chip. This fixed the problem for me -- I loaded the Evox 1.1 Xchip bios and nothing else.

cravavr3 · « **Reply #5 on:** October 05, 2004, 07:26:00 AM »

Rewritting bios to xchip could be useful. Make sure you are writting it correctly.

Author Topic: Reboot Problem. (Read 55 times)