Topic: Sp2 Issues With X-control (Read 62 times)

NghtShd · « **on:** September 30, 2004, 06:35:00 PM »

System 1:
===================================================================
Using XP Pro US (SP1 integrated). Upgraded via the big-ass 272 MB WindowsXP-KB835935-SP2-ENU.exe installer.

Via KT133a Chipset
Athlon Thunderbird 1.33GHz.

Installed X-Control before SP2
===================================================================
System 2:
Using XP Pro US (SP1 integrated). Upgraded via the big-ass 272 MB WindowsXP-KB835935-SP2-ENU.exe installer.

(I think ALi chipset)
HP Athlon XP-M 2500+

Installed X-Control before SP2
===================================================================

I use a USB mouse, keyboard, printer cameras with both systems (when the laptop is at how I use a real keyboard and mouse). No other software or drivers broke under SP2.

I'd also be happy to test for them if they want. Maybe they could do a build with some logging output.

Easybuy2000 · « **Reply #1 on:** October 01, 2004, 07:01:00 AM »

I beleive Team X-Chip is working on a new build release. However knowing them they won't release to public untill alot of testing is done.

I'll let them know you want to be a beta tester.

[email protected] · « **Reply #2 on:** October 03, 2004, 09:57:00 AM »

same here.. ill be a beta tester.....

cravavr3 · « **Reply #3 on:** October 04, 2004, 07:16:00 AM »

pine: I beleive beta tester is for SP2 issue, and I have not seen you post you have that issue.

Surprisingly enough, I have tried many PC's with X-Control loaded prior and after SP2 and still no famous error 0xC00000005 ..... Damn..........

I will be picking up new laptop this after noon and hopefully encounter issue, otherwise..........I don't know.

DJSl4m · « **Reply #4 on:** October 11, 2004, 08:15:00 PM »

I just recieved my X-chip, raw loaded the evo-1.1 file for my first gen xbox, and everything was fine untill I selected for the chip to write, then the program just sat there not displaying any progress meter.

No matter how long I let it stay open, nothing would write to the chip, I'm having the same trouble (writing to the chip) with a chameleon.

I tried with XP-sp2, then formatted and installed XP without SP2 or SP1, and still get the same problem.

I have USB 2.0 enabled, tried different usb ports, restarting, updating driver, still nothing.

This sucks, now I have 2 chips that don't work and a LOT of wasted money, I'm not happy at all.

DJSl4m · « **Reply #5 on:** October 11, 2004, 08:16:00 PM »

I just recieved my X-chip, raw loaded the evo-1.1 file for my first gen xbox, and everything was fine untill I selected for the chip to write, then the program just sat there not displaying any progress meter.

No matter how long I let it stay open, nothing would write to the chip, I'm having the same trouble (writing to the chip) with a chameleon.

I tried with XP-sp2, then formatted and installed XP without SP2 or SP1, and still get the same problem.

I have USB 2.0 enabled, tried different usb ports, restarting, updating driver, still nothing.

This sucks, now I have 2 chips that don't work and a LOT of wasted money, I'm not happy at all.

cravavr3 · « **Reply #6 on:** October 12, 2004, 07:24:00 AM »

Check and verify the molex( blue cable ) is snuggly connected at both ends.

Also, when you connect xchip does the X on top left of xcontrol turn green?

Have you also checked device manager after connection adn verify no conflicts.

Easybuy2000 · « **Reply #7 on:** October 12, 2004, 12:17:00 PM »

Check your connections. It could be an issue with the X-chip itself or drivers not installed correctly.

As Crav said does the red X turn GREEN after you connect the X-chip to the PC and start the X-Control client.

.

DJSl4m · « **Reply #8 on:** October 12, 2004, 05:57:00 PM »

Ok, I checked the connections (unplugged - then replugged back in), the drivers recognise the chip fine (green X is lit up), it even checks out in device manager.

And I still have the problem of it not writing to the chip.

I don't understand why it wont write to the chip, I've flashed and installed several matrix and chameleon chips in the past for friends who fiend for M.A.M.E. on a TV.

Would it help if I loaded Windows 2000 on my PC and try it, or should it write fine under Xp (SP1 & SP2 not installed, with updates OFF) ?

I'm at a total loss of what it could be at this point

tokyoturnip · « **Reply #9 on:** October 12, 2004, 07:03:00 PM »

Proud to anounce the 1.05 version of X-control that Cra Vavr3 sent me today appears to be working. Looks like I am still using the ezusb.dll driver, however I can read from the chip. (Have not tried to write to yet...Scared..LOL).
No application errors and able to run as a XP home admin and limited user.

I hope it works for others.

tokyoturnip

DJSl4m · « **Reply #10 on:** October 12, 2004, 07:31:00 PM »

Awesome man

, care to share it with a currently disapointed fellow Xbox playin' brutha ?

NghtShd · « **Reply #11 on:** October 12, 2004, 09:40:00 PM »

cravavr3 · « **Reply #12 on:** October 14, 2004, 08:47:00 AM »

DJSl4m: Try xchip on a different PC and see if it writes, if it doesn't your chip coudl be defective, why beat around bush when can determine quickly.

Easybuy2000 · « **Reply #13 on:** October 14, 2004, 10:20:00 AM »

New version of X-Control V 1.05 has been released. It fixes issues with users with XP and SP2 installed.

Please download from here http://www.easybuy20...rol_install.zip

cravavr3 · « **Reply #14 on:** October 15, 2004, 08:29:00 AM »

Just remember, drivers need to be loaded on your freinds PC as well.

Ironic, Nothing works out for ourselves.

Author Topic: Sp2 Issues With X-control (Read 62 times)