xboxscene.org forums

Author Topic: Cromwell Boot  (Read 46 times)

FordTang

  • Archived User
  • Newbie
  • *
  • Posts: 9
Cromwell Boot
« on: September 22, 2004, 10:00:00 AM »
I'm not sure why it flashes orange then green.  Mine never does that.

But you see the cromwell bios so that's good.

You're going to have to get a new bios.  You'll find that in the usual places

You're looking for the X-chip 1.1 bios.

You'll need to write that bios on to your chip by the X-control software.  Which you can find at http://www.easybuy2000.com

You use the software by connecting the X-chip to your computer by usb cable.

Get Avalaunch, it's a great dashboard, and it'll let you do what you want on your xbox.  Find an installer for it from http://www.x-disk.com.  You're looking for Ava_X_net 1.5 or something like that.
Logged

Grilf

  • Archived User
  • Jr. Member
  • *
  • Posts: 60
Cromwell Boot
« Reply #1 on: September 23, 2004, 03:31:00 AM »
wink.gif
Logged

bobbyd458

  • Archived User
  • Newbie
  • *
  • Posts: 4
Cromwell Boot
« Reply #2 on: September 28, 2004, 01:26:00 AM »
yes i get the same thing but mine says continue cro..
                                                        bank2-3
                                                        bank 4-7
                                                        bank8-9


all the way to 15. i dont know what to do? i have my image burned already can someone help
Logged

cravavr3

  • Archived User
  • Sr. Member
  • *
  • Posts: 279
Cromwell Boot
« Reply #3 on: September 28, 2004, 09:42:00 AM »
Grab Evox 1.1 and use X-Control and write it to your Xchip.

File- Load Raw- Evox 1.1 fiel Name, then click on X-Chip write changes
Logged

bobbyd458

  • Archived User
  • Newbie
  • *
  • Posts: 4
Cromwell Boot
« Reply #4 on: October 03, 2004, 11:46:00 AM »
well after i write them to the chip? flash? Im trying to understand the whole process. Now im taking one step at a time, after my comp. stated it was recovering from some serious damage. Had to re format

I read a little more and so when you load 1.1 on the xflash, then you write settings, but where do the buttons and load into the bank come to play. I know im making harder than it is.
Logged

cravavr3

  • Archived User
  • Sr. Member
  • *
  • Posts: 279
Cromwell Boot
« Reply #5 on: October 04, 2004, 08:51:00 AM »
If you load Evox 1.1 as is.......you get M8 booted automatically when you power xbox, you can change boot up options in two places:

1) Using Evox 1.1 on xbox press start when powering up and go into Bios Banks and change options for what bank you wish to boot up or load a bios to and what button you want depressed to activate upon power up.

2) Alternatively enough, you can use X-Control software and change settings as stated in the X-Control manual as well.

But then again if all you want is chip enabled disabled functions, I would not worry to much about mapping other buttons.
Logged