Topic: Xchip Solderless Install Problems! (Read 144 times)

schussey · « **on:** August 28, 2004, 06:33:00 PM »

ok well I just read a few threads, and found out that the silver stuff in the holes is solder. But I am still confused as to what to do after this with the solderless applicator.

Do I just attach the solderless applicator to the bolt, and have it fit snug?

Help!

jjff8844 · « **Reply #1 on:** August 28, 2004, 08:09:00 PM »

You need to desolder the those holes.

schussey · « **Reply #2 on:** August 28, 2004, 08:53:00 PM »

could I not just allow the applicator to sit on top?

christineyoung · « **Reply #3 on:** August 28, 2004, 08:59:00 PM »

No need to desolder, as stated in guide if you have a 1.0 or 1.1 xbox you will need the rivits since holes, since you have solder no need for rivits and NO NEED to DESOLDER.

Just resume the install guide after it says install rivits and install.

[email protected] · « **Reply #4 on:** August 29, 2004, 01:28:00 PM »

ok man really?
what damn install guide are u using?
with a solderless adaptor u need NO WIRES..
and what bios do u put on it??
easy..
whatever hacked one u want that will work... the xchip comes withe the cromwell bios.
id try using it with that bios to c if its working 100%
b4 u go changing bioses

schussey · « **Reply #5 on:** August 29, 2004, 05:06:00 PM »

so I do not need to connect anything with additional wire? There were 2 install guides on eastbuy2000.com, but thought the the install guide for the solder-less applicator skipped steps or something.

I just bought a usb port today, and was going to flash EvoX onto it. I was not aware that it already had bios on it.

I installed the solderless applicator today, so all I now have to do is pop the chip on top? I thought that I first had to flash the chip with different bios, and connect some stuff with 30gauge wire.....maybe not.

-chris

[email protected] · « **Reply #6 on:** August 29, 2004, 05:18:00 PM »

Nope all u need to do is pop it on and it should go.
it comes witha legal bios called cromwell.
if u want to put another one on u can.. thats tottaly up to you and where u get it from.
and like i said b4 id leave the factory bios on it to c if the xchip is working 100% then u can do whatever u want.
what youll c if it was an succsefull install youll c a lil red led. that doesnt mean its working it means it getting 5v and ground.. also make sure the bluewire/programmer is facing the INSIDE of the xbox.

schussey · « **Reply #7 on:** August 29, 2004, 06:32:00 PM »

special thanks to pine16 and twisted.penguin for all the help!

ok so now more questions: when I start the xbox, the cromwell menu comes up. What do I do now? I have interest in backing up games, so does this mean that I have to install a different bios such as EvoX?

any additional help is appreciated!

-chris

[email protected] · « **Reply #8 on:** August 29, 2004, 09:48:00 PM »

thats awesome u got it working..
now... about the backing up of the games... your going to have to get a ....Cough* hacked.. opps.. i didnt mean that... bios... where u get it? youll know.. and yes if u also want u can install an os like xcuiter thats the one i personaly like then u can add stuff like xbox media player and ect. cool programs including "backing up" programs!

and you know my msn just gimme a yell and ill help ya out..
that goes for anyone else.
just holla!

schussey · « **Reply #9 on:** August 30, 2004, 12:05:00 PM »

if i install the xcuiter, can i still run evoX?

and also, I am trying to flash the bios via the usb port. When I plug in the usb, nothing happens on my computer, no software attempts to become installed as it says in the guide. Any ideas as to why?

[email protected] · « **Reply #10 on:** August 30, 2004, 04:58:00 PM »

yeah u can u can run mutilpul bios's on xchip!!!

ok and about the it not picking up the usb..
what operating system u using?
and did u download the drivers?
and also have you followed the installation guide for the programmer?

schussey · « **Reply #11 on:** August 30, 2004, 05:01:00 PM »

i have windows XP, and when I plug in the USB to both the xbox and pc, it makes a different "ding" sound then when it properly connects.

it connected properly the first time, and the software install came up. But the usb came unplugged by accident. Now I can't get the software install to come back up

[email protected] · « **Reply #12 on:** August 30, 2004, 05:04:00 PM »

ok. no problem..
easy..
just plug it in to another usb port and its should start up.
if not just start the installing manualy

[email protected] · « **Reply #13 on:** August 31, 2004, 05:34:00 PM »

"and once I do get the usb working, could I just install evoX bios directly via usb instead of the other ones?"
the answere is yes.

have you already tryed pluging it in to another usb port?
if u have it at doesnt work.
im going to have to think about it.. lol

schussey · « **Reply #14 on:** August 31, 2004, 06:00:00 PM »

i ended up just using another computer, lol. But I have the evoX bios on, and it works!

When I start it, I get the typical xbox flash screen, with the evoX symbol next to it. (telling you to hold start for settings)

i still need a dashboard, and what other stuff do i need?

Author Topic: Xchip Solderless Install Problems! (Read 144 times)