xboxscene.org forums

Author Topic: Xbox 1.5 Or Lower  (Read 62 times)

bucko

  • Recovered User
  • Hero Member
  • *
  • Posts: 4255
Xbox 1.5 Or Lower
« on: July 07, 2004, 10:39:00 AM »
ebay
Logged

christineyoung

  • Archived User
  • Sr. Member
  • *
  • Posts: 307
Xbox 1.5 Or Lower
« Reply #1 on: July 07, 2004, 10:44:00 AM »
1.6 can be modded with xchip as well now, just 1.5 or ealier easier install.
Logged

christineyoung

  • Archived User
  • Sr. Member
  • *
  • Posts: 307
Xbox 1.5 Or Lower
« Reply #2 on: July 07, 2004, 11:36:00 AM »
Yes it is possible to use the solderless, but all 1.6 boxes require soldering to regain LPC port access.

What I mean is place solderless adapter on 1.6 box, cut/remove D0 on it and spring and then wire all jump points to top of solderless adapter then slip chip on.

Only 4 wires to solder.

Logged

Easybuy2000

  • Archived User
  • Full Member
  • *
  • Posts: 197
Xbox 1.5 Or Lower
« Reply #3 on: July 07, 2004, 12:08:00 PM »
If you are soldering the 1.6 be very carefull. You MUST NOT solder pin #4 to the LPC doing so will damage your Xbox.

It's best to use the pin header method because you are soldering.

Solder the 4 needed wires to rebuild the LPC port. The wire for the Vcc 3.3 volt is NOT needed for the X-Chip thus ONLY 4 wires are needed instead of 5 to solder.

Don't forget to remove pin #4 from the pin header and make sure you do NOT solder this to the LPC port of the Xbox.

Also make sure you use a bios for the 1.6 Xbox. There have been bios's released that now support the 1.6 and 1 special bios/OS that adds a bunch of advanced featured to the X-Chip. Just make sure you use the correct bios.


Logged