Topic: My Refuse To Boot... (Read 189 times)

RmixR · « **on:** July 04, 2005, 02:05:00 PM »

Hello all,

since one week I'm seaching a solution for my xbox.

It refuse to boot.

It's a v1.3 with Xbit 1.5 modchip.

I flashed my modchip with a lot off bioses (M8plus, M8plusF, X24977, X25035,...)
and I have every time the same error (green/green/green/red... with the modchip start and green/red... with the the modchip off and in the both cases my screen is black)

It's impossible for my xbox to boot on a CD or on the HD !

Please help me, THX.

TheLegace · « **Reply #1 on:** July 09, 2005, 12:16:00 AM »

I am having a the exact same problem. I have a 1.3 also, and xbit 1.5. I need a solution, I am looking around for a solution too, I'll post if I find something.
ThanX
Note, The HDD is unlocked.

Nunim · « **Reply #2 on:** July 09, 2005, 01:31:00 PM »

If you already flashed a bios on there it might be that your not making good contact with the D0 point, if you haven't flashed a bios then thats the reason. I would go with the X2 4983 Bios, it works for everyone with the 1.5 chip.

This post has been edited by Nunim: Jul 9 2005, 08:32 PM

Silentscream__ · « **Reply #3 on:** July 10, 2005, 04:34:00 AM »

Did you remember to set the dip switches to the right bank?

RmixR · « **Reply #4 on:** July 10, 2005, 04:38:00 AM »

Yes :lol:

Silentscream__ · « **Reply #5 on:** July 10, 2005, 05:22:00 AM »

QUOTE(RmixR @ Jul 10 2005, 11:13 AM)

Yes :lol:

Lol, I know it probably sounded stupid, but people have done it before. My guess is probably that the chip is not alaigned properly, and likely does not have a good d0 connection.

Also, I know that this is probably unlikely, but do you have stealth mode turned on? Frequently people report that their 'stealth mode' does not work and causes a frag.

RmixR · « **Reply #6 on:** July 10, 2005, 03:20:00 PM »

How do you turn on stealth mode ?

Silentscream__ · « **Reply #7 on:** July 10, 2005, 06:09:00 PM »

The last switch on the set is the stealth mode one.

RmixR · « **Reply #8 on:** July 11, 2005, 05:30:00 AM »

You are speeking about the forth switch, to switch off the Xbit?

Silentscream__ · « **Reply #9 on:** July 12, 2005, 06:09:00 AM »

RmixR · « **Reply #10 on:** July 12, 2005, 12:11:00 PM »

Ok.
But my problem is still present...

Silentscream__ · « **Reply #11 on:** July 12, 2005, 03:01:00 PM »

Can you get someone to solder it for you? Its not really that hard..

RmixR · « **Reply #12 on:** July 13, 2005, 11:41:00 AM »

It's already solder...

Silentscream__ · « **Reply #13 on:** July 13, 2005, 12:16:00 PM »

QUOTE(RmixR @ Jul 13 2005, 06:16 PM)

It's already solder...

Alrite - sorry, just most people install the xbit using the pogo pins which is what normally causes problems.

Try flashing the xbit using a different PC - does the bios verify after flashing?

Whatabout when the modchip is removed? does the xbox frag then or does it work as though stock?

Author Topic: My Refuse To Boot... (Read 189 times)