Topic: Problem With My Matrix (Read 175 times)

XBLooDX · « **Reply #15 on:** August 28, 2004, 07:13:00 AM »

my last question:
I n description of Slayers auto installer is written that i should only use it with a modded xbox!
What the hell they mean with that? is there something I must buy?? (a new Hardware) or they only mean the chip? please write back

Exzir · « **Reply #16 on:** August 28, 2004, 03:09:00 PM »

Yea it means that you have to have a mod(matrix, ect.) installed otherwise you could not get it to read the burnt disc is all. The ms bios is will not read unsigned code.

XBLooDX · « **Reply #17 on:** August 29, 2004, 02:16:00 AM »

okay now i can start thanks for help @ all!!

XBLooDX · « **Reply #18 on:** August 30, 2004, 02:53:00 AM »

OH shit i have a real problem the guy who sold me my xbox had said its a version 1.2 but i think thats a version 1.1(my serial is XXXXXXX24XXX=1.1??). I already removed that pogopin and what should i do now? BUy a new chip or can i do something? But i dont think that i have a version1.1 because i have tried 4 days all things to run the xbox with modded chip but it don´t works!!
Please help me!

XBLooDX · « **Reply #19 on:** August 30, 2004, 04:20:00 AM »

ok ihave soldered it but in all modes trhe xbox starts 3 times and than the xbox led is red than switches to green. Whats wrong?
in mode(1=the chipp is disabled) the xbox starts normaly and i can play games?
i dont understand that.

Exzir · « **Reply #20 on:** August 30, 2004, 01:25:00 PM »

Ok

What bios did you program on it.
Did you get a programer for it.
I don't know if you can use an MA exploit in order to flash the bios but you can try.

XBLooDX · « **Reply #21 on:** August 30, 2004, 01:44:00 PM »

I programmed evos 7m on it and yes i havbe a programmer for flashing i used winlpc. What is maexploit?

Exzir · « **Reply #22 on:** August 30, 2004, 02:07:00 PM »

Mechassault exploit save game exploit.

If you did not get the d0 soldered correctly or if you put the d0 in the wrong location that might frag it also if not then...

Are you lineing it up by looking under the matrix chip and insureing the pogo pins are hitting the lpc corectly. Also I am guessing one of your pogo pins are not makeing good contact. Most of the time it is the pin 7. Try and look at the motherboard and see if the solder is pitted or something. If it does not make a good contact then it will FRAG since there is no bios being loaded. What I did to correct it once when I had a problem with a 1.1 was to re do all of the solder on the lpc. If you have a solder sucker I would suggest that. If not then you might want to remove the motherboard and place the matrix on the motherboad and do a connection test on the bottom of the lpc.

Exzir · « **Reply #23 on:** August 30, 2004, 02:25:00 PM »

Another thing did you use the supplied lockwasher so it will ground to the motherboard via the screw. If not solder a ground wire or attach a ground wire to the screw area.

XBLooDX · « **Reply #24 on:** August 31, 2004, 01:19:00 AM »

i used the washer. could it be wrong that i have soldered that wire on the alternative d0 on the bottom?

Exzir · « **Reply #25 on:** August 31, 2004, 03:18:00 AM »

Only if you got the wrong point. You have to have the correct spot in order for it to work. If you short out the srong pin then the xbox will not boot.

XBLooDX · « **Reply #26 on:** August 31, 2004, 04:51:00 AM »

okay i have tried when i ´start my xbox in mode 1 the led of the matrix xhip is for a half sek green than switches to red, that i normal isn´it? but in th eother modes the xbox dont work i dont know why. and the xbxox cant read the evox autoinstaller please help.

Exzir · « **Reply #27 on:** August 31, 2004, 02:03:00 PM »

Removed that post.... You stated it was a bad pogo pin.

Ok.

Now you will need to install evox.

Two options to choose from.

First you can download a evox.iso from #xbins and ftp evox over and rename the evox xbe to evoxdahs.xbe and then the xbox iwll read that before msdahs.xbe or you can get slayer auto installer and install evox that way.

Another option if you can not get your cd-rw's to read however is to (this depends on what games you have and if you have a way of getting the saved game files onto a memory chip) get a save game exploit from #xbins and install that on to the auction replay memory chip and then use that game to ftp to your c drive the evox stuff.

Games witgh save exploits are as follows.

Mechassault
007 Agent under Fire or AUF
Splinter Cell

XBLooDX · « **Reply #28 on:** September 01, 2004, 01:54:00 AM »

I have download the slayers evox auto installer and i need help with the installation of it. what i must choose to install it?

Exzir · « **Reply #29 on:** September 01, 2004, 03:51:00 AM »

Since I have not used that be for start a new post for help on that.

Use this section for thoses questions.

Glad you got it all going.

http://forums.xbox-s...hp?showforum=30

Author Topic: Problem With My Matrix (Read 175 times)