Topic: Chameleon Tsop Flash (Read 82 times)

speedxibit · « **Reply #1 on:** July 19, 2004, 06:35:00 PM »

I cannot get the chip to boot off of either of the TSOP bios. I flash it fine but when I change to boot from bank 3 from the modchip, the screen is blank and the eject button flashes green. It will work perfectly fine with any other bios. The D6 will make it flash green while the matrix will make it flash red green and orange. What's my problem?

Exzir · « **Reply #2 on:** July 27, 2004, 07:35:00 PM »

Dude let me get this right you did this.

First flashed the evox d6 tsop to bank 3
switched to bank 3 and rebooted into bnk 3 via software not hardware switch
then you get a no video.

If no video might want to try the old composite cables just to be on the safe side.

Double check you chameleon settings also insure you have it set to boot from bank 0 from cold boot.

imamafackinhokie · « **Reply #3 on:** August 06, 2004, 11:59:00 AM »

when the cd tray ejects from booting from bank 3 insert the bios cd and voila it will flash and turn off you have to hit x or a i believe - it may be a blind flash.

Author Topic: Chameleon Tsop Flash (Read 82 times)