Topic: Please Help (Read 103 times)

SpyderMod · « **on:** March 06, 2004, 06:14:00 PM »

i got a one of the first chameleon's and was wanting to know if the chip would work on a v1.5 and can i do the pinheader on it
if there is and links to it please post them in here thanx

SpyderMod · « **Reply #1 on:** March 06, 2004, 06:42:00 PM »

can some one please help me thanx

SpyderMod · « **Reply #2 on:** March 07, 2004, 04:44:00 PM »

SpyderMod · « **Reply #3 on:** March 07, 2004, 07:06:00 PM »

SpyderMod · « **Reply #4 on:** March 09, 2004, 05:40:00 PM »

bump still no help

jorkul · « **Reply #5 on:** March 10, 2004, 08:27:00 AM »

The only difference between a 1.4 and a 1.5 is the remove the ground and the 3.3v charge from where the pin header goes. So, all you wuold have to do, is install the pinheader, or the Solderless Adapter, and then solder a wire from a ground spot to pin that should contain the ground, and a solder another jumper from the 3.3v charge to the pin that should contain that charge.

I saw a tutorial on this somewhere. I will try to dig it up for you.

SpyderMod · « **Reply #6 on:** March 10, 2004, 08:50:00 AM »

SpyderMod · « **Reply #7 on:** March 11, 2004, 03:47:00 PM »

jorkul · « **Reply #8 on:** March 12, 2004, 08:10:00 AM »

This is a link to OzXodus' Pin Header Installation. They have some good pics, and instructions for you to follow to install the pin header with a v1.5 mobo.

(This would have been fairly easy for you to find yourself, but I hope it helped!)

Author Topic: Please Help (Read 103 times)