Topic: Chameleon Won't Flash Through Evox (Read 71 times)

KingViper · « **on:** February 29, 2004, 08:30:00 PM »

Hey, I got a chameleon through a trade. It first booted and asked me to insert a cd (cromwell). I got that all figured out, but now it won't flash through Evox. I have the stupid INI settings in there, but it gets stuck at Erase. No matter what bios I use. I was going to try with the cd again, but my thomson crapped out, so I'm waiting. Any help would be appreciated. Also, it will boot to the other banks.

KingViper

KingViper · « **Reply #1 on:** March 01, 2004, 05:07:00 PM »

The C:\ folder or the C:\Bios\ folder, which is where I have them. I can select the bios, so it is finding them. It just locks up at the erasing part.

KingViper

KingViper · « **Reply #2 on:** March 01, 2004, 08:14:00 PM »

Yes sir. Mine was getting stuck on a Winbond, was something like w49, I can't remember, close to yours. Deleted it, my INI already had the AMD, and now it works perfectly. Thank you so much.

KingViper

KingViper · « **Reply #3 on:** March 01, 2004, 08:41:00 PM »

NEW PROBLEM..lol

Ok, so I flashed the second bank with Evox_Matrix_Tsop_flash.bin Now it turns on and goes through every color on the LEd. Am I required to solder the extra wires as listed with the matrix bios file? I figured that the chameleon with its A15 point wouldn't need them. Thanks

edit: Yes I am flashing bank 3.
edit#2: I just found out that if the TSOP is corrupt, you cant use the chameleon to flash it, seems worthless to me.

KingViper

Author Topic: Chameleon Won't Flash Through Evox (Read 71 times)