xboxscene.org forums

Author Topic: Matrix Chip Problems  (Read 66 times)

nickernack

  • Archived User
  • Newbie
  • *
  • Posts: 3
Matrix Chip Problems
« on: January 30, 2004, 09:47:00 PM »
I have also had my Matrix chip installed for about 1 1/2 years.  I figured it was about time to upgrade my hdd.  I have a 1.1 box, I tried to flash bio with slayers which only supported 1.2 + 137 HDD support.  Didn't work for my 1.1 so I removed chip and installed X2 4981.06 using FlashPack and Parrallel programmer, installed a driver, as no other program would work for me.  Now, I can't seem to align my matrix chip, I don't know what could have happened, since it was working perfectly before I removed it.  It almost looks like the DO point is discolored?  Slight brown coloration, ???????      Can anyone suggest any options I might want to consider?  I have cleaned all of my contact points with Alcohol, still only flashes red in test mode.  Sucks cause I just got a 200 GB HDD, and now I can't even use my previously installed 120GB.  Can I solder, maybe upgrade chips?, flash TSOP?  I don't know what to do, life without the xbox sucks................
Logged

akillamuthafucca

  • Archived User
  • Full Member
  • *
  • Posts: 122
Matrix Chip Problems
« Reply #1 on: January 31, 2004, 01:15:00 AM »
Just keep trying or get rid of that matrix you can find a cheap alternative in buy and sell if you do get it fixed you it will eventually get disaligned again
Logged

justmejg

  • Archived User
  • Newbie
  • *
  • Posts: 14
Matrix Chip Problems
« Reply #2 on: January 31, 2004, 01:11:00 PM »
beerchug.gif
Logged

akillamuthafucca

  • Archived User
  • Full Member
  • *
  • Posts: 122
Matrix Chip Problems
« Reply #3 on: February 01, 2004, 04:21:00 AM »
I think your problem is becuse yopu hdd is modified and you donot have ms dash in place try a hotswap with your pc and get the hdd back to normal or buy a locked hdd from buy and sell and try that
Logged

akillamuthafucca

  • Archived User
  • Full Member
  • *
  • Posts: 122
Matrix Chip Problems
« Reply #4 on: February 06, 2004, 02:59:00 AM »
NO it has to be an unlocked hdd with all the partitions in place
Logged

Allenad

  • Archived User
  • Newbie
  • *
  • Posts: 3
Matrix Chip Problems
« Reply #5 on: February 07, 2004, 04:33:00 PM »
laugh.gif
Logged

nickernack

  • Archived User
  • Newbie
  • *
  • Posts: 3
Matrix Chip Problems
« Reply #6 on: February 07, 2004, 06:29:00 PM »
Will the 4986.06 bios support my 120 GB hdd? or do I need to revert to an old BIos???
Logged

nickernack

  • Archived User
  • Newbie
  • *
  • Posts: 3
Matrix Chip Problems
« Reply #7 on: February 09, 2004, 08:59:00 AM »
I took off the washer/place holder that came with the matrix.  It instantly went green.  But I was getting an error 16 so I reflashed to the original bios that was intended for the matrix, something like  Evolutionv2.5 256k.bin......    aligned the chip and I was back in business.  Flashed to 4977*C* and put in a 200 GB harddrive and formatted using Slayers.  Now, my question is how do I Transfer files with only one xbox from my old 120Gb to my new 200 GB?  I tried to use FatBox 1.4 and put the hdd in a pc, but it wouldn't recognize the partitions on the drive.  It also said to put the xbox drive on master and the pc drive on slave????   does this make any sense??  Any other ways to do this with only one modded box??
Logged