Topic: Matrix On 1.4/1.5 Xbox. (Read 165 times)

XboxBaboon · « **on:** January 03, 2004, 04:03:00 AM »

if you want to turn the matrix into a solder chip then yes, also make sure you have a compitable bios for the focus chip

Hogy · « **Reply #1 on:** January 03, 2004, 04:26:00 AM »

Hi,
i have a Matrix chip, and im using it on an xbox 1.0

i have had problems with it not working after a few months of use.. i then have to re-open my xbox and re-align it.. i dont think it actually requires realigning but its as if the chip has lifted of the main board..

anyway.. i noticed in the above post that u say it can be solderd.. is there a guide on the web anywhere to show me how to do it.. as i think its probably going to be less work than opening my xbox every couple of months..

thanx

Hogy

No_Remorse_666 · « **Reply #2 on:** January 03, 2004, 10:39:00 PM »

No you can not install a Matrix in a 1.3 - 1.5 no matter what install method you use.

ltnuke · « **Reply #3 on:** January 04, 2004, 02:46:00 PM »

The chameleon can be installed on all versions of the xbox. Versions 1.0-1.1 require desoldering of the LPC points.... V1.5 requires that LPC 2 and 9 be soldered to ground and 3.3V respectively. There are some great tutorials on www.xbox-scene.com

rtfm

Vric · « **Reply #4 on:** January 04, 2004, 03:35:00 PM »

QUOTE (ltnuke @ Jan 5 2004, 12:46 AM)

The chameleon can be installed on all versions of the xbox. Versions 1.0-1.1 require desoldering of the LPC points....

not if you use the solderless adapter

a94cobra · « **Reply #5 on:** January 04, 2004, 05:39:00 PM »

I couldn't get my Matrix to work even with connecting the Lframe to the MPcX chip.

flutt · « **Reply #6 on:** January 05, 2004, 02:02:00 AM »

So I can´t use it on a 1.4 box even with soldering?

Thanks for your help anyway!!

dzv · « **Reply #7 on:** January 05, 2004, 03:04:00 AM »

Theoretically, it should work, but I haven't tried. a94cobra says he couldn't get it to work, but that doesn't necessarily mean it's not possible. It's a very difficult installation.

@a94cobra, were you using a compatible BIOS?

dojoman · « **Reply #8 on:** January 05, 2004, 07:53:00 AM »

QUOTE (Hogy @ Jan 3 2004, 02:26 PM)

Hi,
i have a Matrix chip, and im using it on an xbox 1.0

i have had problems with it not working after a few months of use.. i then have to re-open my xbox and re-align it.. i dont think it actually requires realigning but its as if the chip has lifted of the main board..

anyway.. i noticed in the above post that u say it can be solderd.. is there a guide on the web anywhere to show me how to do it.. as i think its probably going to be less work than opening my xbox every couple of months..

thanx

Hogy

I've had the same problem w/ Matrix chip not working after a few weeks. It's alignment problem. I fixed it by soldering the "d0" spot w/ a wire and solder the wire back to the chip. It's very tricky to solder "d0", but a lot reliable than other methods.

a94cobra · « **Reply #9 on:** January 05, 2004, 01:51:00 PM »

I may have another issue with that xbox. I ordered a couple Chameleons and can't get them working either. It is a 1.4. I know I had the Lframe connected properly and was using Evox M7, even tried 4979 X2 BIOS. But when the new Chameleons don't work, something else must be up. I have some ideas. I am going to try the Matrix again. So if it is possible I will reply.

Hogy · « **Reply #10 on:** January 06, 2004, 04:16:00 PM »

QUOTE

I've had the same problem w/ Matrix chip not working after a few weeks. It's alignment problem. I fixed it by soldering the "d0" spot w/ a wire and solder the wire back to the chip. It's very tricky to solder "d0", but a lot reliable than other methods.

Thanx Dojoman,
was wondering if you could show me exactly how u did this.. i am extremely worried about soldering (hence the reason i initially bought a solderless chip) and i dont want to destroy my xbox MB... perhaps a photo or something of how your xbox looks would be excellent..
but please don't go to any trouble..

appreciate your response..

Thanx

Hogy

Author Topic: Matrix On 1.4/1.5 Xbox. (Read 165 times)