Topic: Switch For Chameleon? (Read 117 times)

excetara2 · « **on:** December 30, 2003, 09:27:00 AM »

bump!!!!!

ofx210p · « **Reply #1 on:** December 30, 2003, 11:20:00 AM »

Really easy

Simply drill hole in case to the left of the DVD where theres no metal case

Next get a simple single throw, single pole switch

Wire from D0 or AltD0 to the switch

Wire from switch to D0 on chameleon

ensure wires go through case vent holes etc

also helps if you are using a coloured bios then you know for sure that when it is coloured it is on, and when you see std green logo its off.

hope this helps...

If you need more help PM / email me

Cheers

Chris
xboxbreakers.co.uk

ofx210p · « **Reply #2 on:** December 30, 2003, 11:23:00 AM »

Oh btw wiring for the rest of the chameleon remains as per installation instructions.

If you are using the solderless adaptor you must remove the springy wire BEFORE doing all the above stuff !

Damuscus · « **Reply #3 on:** December 30, 2003, 07:54:00 PM »

F it, I think I'll just unplug my chameleon when I go on live, it's on the solderless adapter, so just lifting the chip off the adapter would work, right?

Maverick0984 · « **Reply #4 on:** December 30, 2003, 11:07:00 PM »

i forget the command, but i can find it if you have a hard time, just add a line to your evox.ini to basically disable the chameleon, turning it to mode 3 or something, easier than opening it up and takin the adapter off...

but doesn't account for the accidental times

excetara2 · « **Reply #5 on:** December 31, 2003, 07:49:00 AM »

Yal, I added that to the menu, but when I am not here. I jjust want to disable the chip so no one gets on live accidently.

excetara2 · « **Reply #6 on:** December 29, 2003, 02:49:00 PM »

Forgot to say.

V1.5 X-Box
Chameleon V1.3

excetara2 · « **Reply #7 on:** December 29, 2003, 06:03:00 PM »

Any Ideas?

Author Topic: Switch For Chameleon? (Read 117 times)