Print

[nitz]

excetara2,
Where did you specify "flash="? was it in XP.ini? if so what is the command? was it "flash=EvoxM7_ef.bin"

[Morglum]

CODE

Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000 Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000 Flash = 0xadd5,"Hynix - HY29F080",0x100000 Flash = 0xadb0,"Hynix - HY29F002",0x40000 Flash = 0x20f1,"ST - M29F080A",0x100000 Flash = 0x20B0,"ST - 29F020",0x40000 Flash = 0xbfb6,"SST - 39SF020",0x40000 Flash = 0xbfb7,"SST - 39SF040",0x80000 Flash = 0xbf61,"SST - 49LF020",0x40000 Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000 Flash = 0x378c,"AMIC - A29002",0x40000 Flash = 0x01d5,"AMD - Am29F080B",0x100000 Flash = 0x015b,"AMD - Am29LV800B",0x100000 Flash = 0x01a4,"AMD - Am29F040B",0x80000 Flash = 0x01da,"AMD - Am29LV800B",0x100000 Flash = 0xda0b,"Winbond - W49F002U",0x40000 Flash = 0xda8c,"Winbond - W29f020",0x40000 Flash = 0xc236,"Macronix - MX29F022NTPC",0x40000 Flash = 0x89a6,"Sharp - LH28F008SCT",0x100000,0x20,0xd0,0x10

[RudeMojoWire]

i'm having the same problem with xp.exe with a matrix. it was suggested that i try new battery, different computer, different copies of the bios in case of corruption, pressing the chip to the programmer, changing settings in the bios for the parallel port type - all to no effect. Frustrating, indeed.

[supernoman]

QUOTE (RudeMojoWire @ Jan 12 2004, 07:26 PM)

i'm having the same problem with xp.exe with a matrix. it was suggested that i try new battery, different computer, different copies of the bios in case of corruption, pressing the chip to the programmer, changing settings in the bios for the parallel port type - all to no effect. Frustrating, indeed.

exact same problems here.  let me know if you find a solution or anyone for that matter.

[drunkpug]

i have programmerd many of matrix chips

dont use xp with a matrix chip .

use winlpc

u can easly tell if your hardware is capable of flashing the matrix chip if upon launch of the program u have to hit a ok button if u goes straight into the program your computer will not be able to format the matrix chip with the programmer

as far as flashing chamelion with matrix programmer and xp.zip

i test on 2 computers dell p3 733 not working and a gateway p3 533 not working ?

with the dell i can not flash a matrix or chamealion chip

with the gateway i was not able to flash the matrix of the chamelion chip with xp.exe or winlpc

so use winlpc to flash your matrix chips and if u dont get that agree screen when u launch the program move onto another compuer it will not work

good luck

[akillamuthafucca]

I think your ok cause evox only reads the bios types that were written in that release ver.
Just flash whatever bios you lke it will only be able to tell if its like the m7 or something
or the d6

[akillamuthafucca]

corrupted bios get some new ones that happens bioses are messed up