Topic: Error 16 Pla Help (Read 75 times)

poplife · « **on:** December 13, 2003, 03:14:00 AM »

hi Raz I have the same exact problem looking all over for help,in the process of realigning the matrix i stripped the
board and now have two problems, very frusterating please anyone have any suggestions for error 16 problem? by the way Raz error 16 has something to do with dashbord

EvolutionXecuter · « **Reply #1 on:** December 13, 2003, 04:53:00 AM »

I have the same problem too!! i have Xecuter 2.2 lite and he showing me that error 16 after he showing the logo! please help!

sphere man · « **Reply #2 on:** December 13, 2003, 11:14:00 AM »

error 16 is clock settings not right.
if you have the latest bios je can get past it or else you need a different hd with a org dash on it.
is there anyone else who knows a way trough it.

Raz^ · « **Reply #3 on:** December 17, 2003, 07:54:00 AM »

brandonb · « **Reply #4 on:** December 18, 2003, 11:18:00 AM »

I was having this problem with the bios evox_m7. So I loaded the d.6 bios on the matrix chip. From what I understand is that the error 16 is a clock setting error. So reflash with the d.6 bios and see what happens.

Raz^ · « **Reply #5 on:** December 19, 2003, 08:17:00 AM »

JonDante · « **Reply #6 on:** December 19, 2003, 08:46:00 AM »

Take the chip out. If your Xbox boots with no error 16, then fix the clock.

If you get an error with the chip out, you will have to reinstall the chip (making sure it is aligned) and boot from a Slayer's or Evox XISO CDRW.

Then you can repair your clock from there.

JonDante

Raz^ · « **Reply #7 on:** December 20, 2003, 07:34:00 AM »

I tried to take out the chip and then i put un xbox harddrive in it (thats clean from evox) and then i get error 16

Raz^ · « **Reply #8 on:** December 20, 2003, 08:23:00 AM »

w8 a sec i dont beleive thats the harddrice i s clean.. so its un ordenary xbox drive with evox on it... WTF should i do

JonDante · « **Reply #9 on:** December 20, 2003, 08:34:00 AM »

I will say it again...you need to try to boot from an XISO like Slayers or an Evox XISO CDRW...CDRW...you have made yourself. Apparently the HDs are giving you problems.

Just try that. If you can boot in, goto system settings, fix the clock.

Then...ftp to your box and copy over the evox files just in case.

JD

Author Topic: Error 16 Pla Help (Read 75 times)