xboxscene.org forums

Author Topic: I Want To Flash Tsop With Cameloen  (Read 57 times)

Ben999_

  • Archived User
  • Hero Member
  • *
  • Posts: 651
I Want To Flash Tsop With Cameloen
« on: February 09, 2004, 08:57:00 PM »
QUOTE (tdk337 @ Feb 5 2004, 07:55 AM)
I can't find EvoX_MatriX_TSOP_flash.zip and was wondering:

I have a v1.0 non-Sharp box with Chameleon installed; if I were to solder the 2 jump points and booted into Slayer's 2.5 EvoX install cd, can't I cut d0 or physically pull out the chip out to flash the TSOP?

No that will not work because once you boot from the LPC it is not possible to flash the TSOP. You have to boot from the TSOP in order to flash to it. Hence using save exploits after booting from the retail bios on the TSOP. Besides, I tried it quite a few times when I first tried to do a TSOP flash and of course it did not work.
Logged

tdk337

  • Archived User
  • Newbie
  • *
  • Posts: 3
I Want To Flash Tsop With Cameloen
« Reply #1 on: February 10, 2004, 12:35:00 PM »
I found the D6_TSOP.BIN but it says my TSOP is not writeable. I've checked my soldering on the two points a million times and still get the same thing. I've modded about 3 Xboxes using the pin header install and successfully flashed the TSOP on two 1.5 Xboxes. I know I have the soldering points nailed but it still says my TSOP is not writable. Please help! I have a Chameleon on it now, but I just want to be able to do a 1.0 box as well.
Logged

pontfirebird73

  • Archived User
  • Full Member
  • *
  • Posts: 161
I Want To Flash Tsop With Cameloen
« Reply #2 on: December 08, 2003, 08:46:00 AM »
Logged

JonDante

  • Archived User
  • Sr. Member
  • *
  • Posts: 263
I Want To Flash Tsop With Cameloen
« Reply #3 on: December 08, 2003, 01:22:00 PM »
You have to solder the A15 from the Chameleon to the motherboard.

Then you can flash TSOP.

JD
Logged

TommyE

  • Archived User
  • Newbie
  • *
  • Posts: 8
I Want To Flash Tsop With Cameloen
« Reply #4 on: December 08, 2003, 03:00:00 PM »
blink.gif


Are the more specifics you could provide me??

Thanks for your help so far.

TommyE
Logged

pontfirebird73

  • Archived User
  • Full Member
  • *
  • Posts: 161
I Want To Flash Tsop With Cameloen
« Reply #5 on: December 08, 2003, 07:46:00 PM »
i think it would involve a setting in the evox.ini file. i am not sure i actually wondered the same thing and the only i ever found was solder A15 to the cham.
Logged

TommyE

  • Archived User
  • Newbie
  • *
  • Posts: 8
I Want To Flash Tsop With Cameloen
« Reply #6 on: December 10, 2003, 10:56:00 AM »
Anyone who knows where I can find a complete guide that describes how to use the A15 function of the Cameleon??
I've been reading what I can now, and all that is mentioned is D0.



TommyE
Logged

LordAzlan

  • Archived User
  • Newbie
  • *
  • Posts: 8
I Want To Flash Tsop With Cameloen
« Reply #7 on: December 11, 2003, 02:29:00 PM »
beerchug.gif
Logged

pontfirebird73

  • Archived User
  • Full Member
  • *
  • Posts: 161
I Want To Flash Tsop With Cameloen
« Reply #8 on: December 11, 2003, 09:52:00 PM »
yes, that is exactly what i wanted.
Logged