Topic: Flashing 4979 (cham 1.3) Via Evox 3921 Problem (Read 86 times)

JonDante · « **on:** November 24, 2003, 01:49:00 PM »

It sounds like your MD5 definition in your Evox.ini does not list the 4979...you have to manually add it. Everything will work normally without it, so don't worry.

JD

Fastlane · « **Reply #1 on:** November 24, 2003, 05:17:00 PM »

Ah, I see - thanks!

Fastlane · « **Reply #2 on:** November 24, 2003, 05:34:00 PM »

Actually, it doesn't seem to watch to flash without.

Fastlane · « **Reply #3 on:** November 24, 2003, 05:40:00 PM »

Hrm..actually, it seems to have a problem with the flash memory. Mabye the FLASH entires?

JonDante · « **Reply #4 on:** November 24, 2003, 05:40:00 PM »

I am sorry I misread your post. You are trying to flash and it is not working.

Hmmm. Is the file on your HD in the BIOS folder on drive C:

JD

Fastlane · « **Reply #5 on:** November 24, 2003, 05:42:00 PM »

BINGO! Ok, I had to copy the new flash entries out of the Evox.ini.

They should really design a 'system.ini' that then gets overridden by the user's ini. I don't like to overwrite mine, but I missed somethigns I needed to copy.

Thanks for pointing me!

Fastlane

bakin1 · « **Reply #6 on:** November 29, 2003, 09:39:00 PM »

I have the same problem, at first it said "unknown flash type", then I edited the evox.ini by adding the hash values(ROM="blah",hexnumber) and then when I tried to flash, it said "bios not writable". any suggestions?

agony · « **Reply #7 on:** November 30, 2003, 07:06:00 AM »

try to add this in evox.ini

Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0x20B0,"ST - 29F020",0x40000
Flash = 0xbfb6,"SST - 39SF020",0x40000
Flash = 0xbfb7,"SST - 39SF040",0x80000
Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W29f020",0x40000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0x89a6,"SHARP - LH28F008SCT",0x100000,0x20,0xd0,0x10
# for Matrix/Xodus
Flash = 0xbf61,"SST - 49LF020",0x40000
# for Xecuter2
Flash = 0x01d5,"XECUTER2",0x100000

bakin1 · « **Reply #8 on:** November 30, 2003, 10:53:00 AM »

QUOTE (agony @ Nov 30 2003, 05:06 PM)

try to add this in evox.ini

Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0x04a4,"FUJITSU - MBM29F040C",0x80000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0xadb0,"Hynix - HY29F002",0x40000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0x20B0,"ST - 29F020",0x40000
Flash = 0xbfb6,"SST - 39SF020",0x40000
Flash = 0xbfb7,"SST - 39SF040",0x80000
Flash = 0x04BA,"ALX2+ R3 FLASH",0x40000
Flash = 0x378c,"AMIC - A29002",0x40000
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01a4,"AMD - Am29F040B",0x80000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W29f020",0x40000
Flash = 0xc236,"MACRONIX - MX29F022NTPC",0x40000
Flash = 0x89a6,"SHARP - LH28F008SCT",0x100000,0x20,0xd0,0x10
# for Matrix/Xodus
Flash = 0xbf61,"SST - 49LF020",0x40000
# for Xecuter2
Flash = 0x01d5,"XECUTER2",0x100000

still says "bios not writeable", thanks though.

bakin1 · « **Reply #9 on:** December 12, 2003, 11:53:00 AM »

I updated to the newest dash(3935), now it just is at "erasing" forever, anyone know how to fix this?

Author Topic: Flashing 4979 (cham 1.3) Via Evox 3921 Problem (Read 86 times)