Topic: Problem Disabling Chameleon (Read 86 times)

lordrain · « **Reply #1 on:** August 27, 2003, 11:29:00 PM »

any other ideas?

shanafan · « **Reply #2 on:** August 27, 2003, 11:32:00 PM »

Why don't you just boot the onboard BIOS (TSOP) through EvolutionX? That's how I do it for Xbox Live play.

x-xboxer · « **Reply #3 on:** September 02, 2003, 08:00:00 AM »

Morfious · « **Reply #4 on:** September 03, 2003, 09:29:00 AM »

The a15 is only needed if you want to flash the tsop. I have a 1.3 chameleon with the x2 4977 and have no problem. What mode is your chameleon in and do you have the right sized bios installed, or are you trying to run a 512k bios in a 256k space. If you totally remove the chip what happens. Frag or does it boot?

rzyzzy · « **Reply #5 on:** September 03, 2003, 11:54:00 AM »

how bout the clock... has it been set in msdash? I'm presuming you haven't swapped hard drives...

x-xboxer · « **Reply #6 on:** September 09, 2003, 06:00:00 AM »

i found this was actually due to using an IBM drive. replaced with a seagate and no problems.

Thanks for the suggestions.

Author Topic: Problem Disabling Chameleon (Read 86 times)