Topic: Matrix Problem.....xbox Turning Itself On And Off (Read 72 times)

EclipseGST303 · « **on:** August 06, 2003, 05:53:00 AM »

we just put the matrix(aligned correctly) in my xbox, and when u turn the power on the xbox will turn on for like 2 seconds, then it will turn off....then turn back on for a second, then turn off, then back on and it stays on, but the screen is black. We flashed it with the Xecuter bios, as well as the Matrix, and that doesnt seem to be the problem. Once the Modchip is taken out, the xbox loads just fine. So what should we try? Also we cant get any programs on the xbox because "the xbox does not recognise this disc". Which doesnt make much sense because we are using CDRW's on my friends Samsung DVD drive. So any help would be GREATLY appreciated.

EclipseGST303 · « **Reply #1 on:** August 06, 2003, 06:32:00 AM »

we have it in test mode when we were aligning it. We did it the easy/more dangerous way and aligned it while the power was on, Blinked red until it was aligned, then binked green, and we screwed it down and its aligned. And while in test mode, it will boot just fine, then when we switch it to mode 1(i think), this is when it starts to turn on and off. And yes, it actually turns on and off, u can hear the HD powering up and down, as well as the fans.

O and also, the Matrix bios is what is on there now.

Also if u turn the XBOX on and off like 20 times (while its booting itself on and off) it will eventually just turn on normal, however its like the modchip isnt doing anything, regular boot up screen and it still says MS under the X. Everytime it does this i have to reset the clock.

WodMan · « **Reply #2 on:** August 06, 2003, 06:54:00 AM »

QUOTE

Once the Modchip is taken out, the xbox loads just fine. So what should we try? Also we cant get any programs on the xbox because "the xbox does not recognise this disc". Which doesnt make much sense because we are using CDRW's on my friends Samsung DVD drive.

You are contradicting yourself (although I am not sure you know it

).

If you take the Modchip out and try to boot off of a disk and get "the xbox does not recognise this disc" it makes perfect sense. Why would it boot a CD-RW without a chip installed?

QUOTE

And while in test mode, it will boot just fine, then when we switch it to mode 1(i think), this is when it starts to turn on and off. And yes, it actually turns on and off

This is most likely your problem. Mode 1 is for aligning the chip. Once the chip is aligned you need to switch the chip to mode 2. Mode 2 is standard "mod enabled" mode. If you need to flash the chip you need to switch it to mode 4.

Try this and report back.

EclipseGST303 · « **Reply #3 on:** August 06, 2003, 07:06:00 AM »

well damn, i wish i hadnt given up for the day, my modchip is at my friends house, and me and my xbox are at my house. I dont know which modes the chip was in, but i bet they were wrong. And i meant i tried to get the cd to boot with the modchip in it, i just typed it in the wrong order. ill reply as soon as i can get ahold of my friend.....ZZZzzzZZZzzz =)

EclipseGST303 · « **Reply #4 on:** August 06, 2003, 07:10:00 AM »

QUOTE (dzv @ Aug 6 2003, 04:03 PM)

The symptoms you have are called a FRAG. The Xbox powers on and off a couple of times, then just Flashes Red And Green. Obviously, with Blue LEDs, you no longer see the red/green flashing, but it's definitely what you are experiencing.

If you want to know more about FRAGging, read the Frag FAQ:
http://forums.xbox-s...=ST&f=9&t=68278

In your case, it most likely means one of two things.

1. Not all of the pogo pins are making proper contact to the motherboard. (Don't put too much faith in the flashing green light, it sometimes lies).

2. There is no working BIOS on the chip. If the programming software is verifying OK, then this is not likely to be your problem, but it doesn't hurt to try flashing a few different BIOSes. I always recommend a noani BIOS for MatriX installations.

so FRAGing means the xbox actually powers itself down(HD and fans turn off) then back on? Cuz after reading that, it just said the leds blink red and green. Sorry to be so dumb, just making sure.....

dzv · « **Reply #5 on:** August 06, 2003, 07:17:00 AM »

QUOTE (EclipseGST303 @ Aug 6 2003, 04:10 PM)

so FRAGing means the xbox actually powers itself down(HD and fans turn off) then back on? Cuz after reading that, it just said the leds blink red and green. Sorry to be so dumb, just making sure.....

hmmm... You're right, that FRAG FAQ doesn't actually say that the Xbox turns on and off a couple of times, and THEN flashes red and green. That FAQ should probably be amended. But trust me, what you are experiencing is a FRAG.

EclipseGST303 · « **Reply #6 on:** August 06, 2003, 07:23:00 AM »

i probably have 2 problems because when i do get the xbox to boot up, its normal, so i probably need to check the mode, and then find out y its fraging. Thank you for all your help so far

Author Topic: Matrix Problem.....xbox Turning Itself On And Off (Read 72 times)