Topic: Matrix And Xbox V1.1 (Read 85 times)

bLiNkStA · « **on:** June 28, 2003, 12:23:00 PM »

im getting the same thing !!! i have no idea whats going on, but mine is apple 3.0
its just boots into reg dahboard

peds · « **Reply #1 on:** June 28, 2003, 12:45:00 PM »

yeah im just curiuos if i missed a step cuz the lpc holes are filled i took a magnify glass to them and there appears to be no solder splash either i cleaned everythign with alcohol aswell...

xviaox · « **Reply #2 on:** June 28, 2003, 02:26:00 PM »

QUOTE

peds Posted on Jun 28 2003, 08:32 PM
--------------------------------------------------------------------------------
Hey guys just been reading through these forums looking for the same problem as mine. Anyways ive installed about 5 or 6 matrix on v1.0 xbox's so needless to say i know what has to be done. From what i understand i need to solder the lpc points on v1.1 xbox and then look for a flash of green then blinking red instead of just blinking green. I soldered the points and from what i can tell it looks flawless really smooth and all the points seem to touch. Still i am not getting the flash of green all i seem to be gettin is the red. Anyways any help would be great, maybe i missed something? thx in advance.

Did you download the right bios?

if so...try inserting the boot disk and see if it reads it. if it does read it then you are on the right track. if not then....you did something wrong...

peds · « **Reply #3 on:** June 28, 2003, 03:26:00 PM »

hmm ok well i have the same bios on the chip as i do on the ones that worked for the 1.0
would i need a newer one for the 1.1? also even if i had the older bios shouldnt i still get the green flash if it was properly aligned?

strange · « **Reply #4 on:** June 28, 2003, 03:56:00 PM »

well i am having somewhat of a problem with this also, i have flashed and everything. green light to red flashing so moved it to mode 2, and reset the system. Once it reboots it does it 2x and then on the 3rd red flashing eject. but the light on the matrix chip is green.. any idea on what might be wrong on my end?

FIREitUP · « **Reply #5 on:** June 28, 2003, 07:33:00 PM »

green has nothing to do with the bios. thank you for your time

dzv · « **Reply #6 on:** June 28, 2003, 09:50:00 PM »

When installing on a v1.1 Xbox, the LEDs are practically useless. I don't even bother installing in Mode 1. Check this thread:

http://forums.xbox-s...68682&hl=matrix

peds · « **Reply #7 on:** June 29, 2003, 01:50:00 AM »

so your sayin its not even nescassary to get that green flash that im lookin for?

dzv · « **Reply #8 on:** June 29, 2003, 01:58:00 AM »

What I'm saying is that using the LEDs as an indication of a successful alignment is not reliable (on a v1.1). And I think the green flash you are looking for doesn't occur while you're aligning, I think it only occurs when you poweron the Xbox. In other words, you would have to align the chip visually, then turn the Xbox on and see if you get the green flash. If not, you have to powerdown and try again. And even if you do get it, I don't think it's a 100% indication of alignment.

peds · « **Reply #9 on:** June 29, 2003, 09:46:00 AM »

alright thx for the help! im gunna giver a try and ill let u know how things go

Author Topic: Matrix And Xbox V1.1 (Read 85 times)