Topic: Cant Flash My Matrix (Read 191 times)

Darkdog · « **Reply #15 on:** April 18, 2003, 04:16:00 PM »

Igot yet another error but maybe its familure Right click this and Save target as

http://www.freewebs....ion/comprom.jpg

Darkdog · « **Reply #16 on:** April 18, 2003, 06:27:00 PM »

Help please

Acetaminophen · « **Reply #17 on:** April 18, 2003, 06:41:00 PM »

Darkdog - we are in the same boat. I cant get my Matrix chip to flash either.

Also - not that if you want to use wmilk on a windows machine you will also
need to download the DLL file from warmcat.com site

Darkdog · « **Reply #18 on:** April 18, 2003, 07:30:00 PM »

i have no clue im getting ready to just see if i can return it and just have someone put in a solder one for me...im starting to give up..I downloaded that .dll from warmcat also....I have done just about everything....

Darkdog · « **Reply #19 on:** April 19, 2003, 01:39:00 AM »

Final Bump for the night

hypr-x · « **Reply #20 on:** April 19, 2003, 03:18:00 AM »

Check you computer bios settings for the parallel port. Have had success with ECP+EPP.

Also, make sure you have ntiosupp.dll in your wmilk dir.

Try with the Evox 3.6 or the Evox D.6 bios, both works with 1.1 box. Select the a bios with a color mod.

Make a batch file (e.g. flash.bat) to ease the execution, let it contain the following lines:
@echo off
wmilk.exe -0c
wmilk.exe -c
wmilk.exe -c -a ffc00000 -v -p %1

Try and rename your bios image, make it short - 8 char.

Try wmilk again by running:

flash.bat evoxd6r.bin

Darkdog · « **Reply #21 on:** April 19, 2003, 10:37:00 AM »

Okay ill try it...Sounds confusing but eh

FIREitUP · « **Reply #22 on:** April 19, 2003, 01:22:00 PM »

get win LPC and then you gotta push the programmer in well and squeeze the edges while it flashes, also try different computers, xodus recommends intel but mine worked well on my EpOx mobo

Darkdog · « **Reply #23 on:** April 19, 2003, 02:56:00 PM »

I swear i did everything...

EuGoR · « **Reply #24 on:** April 19, 2003, 03:00:00 PM »

I am in the same situation. I got my modchip (Matrix) 3 days ago and have had no luck with over 5 computers with varying OS's and using all tips learned in these forums. Is there anybody who has had this major problem and what were their final solutions.

HumanClay · « **Reply #25 on:** April 19, 2003, 03:05:00 PM »

push freaking hard into the printer port. U really gotta shove it in(don't break it) make sure the matrix is in the programmer good too there and HOLD it in the same spot. Don't move.

y220186 · « **Reply #26 on:** April 19, 2003, 03:51:00 PM »

In the bios do you get options on the parallel port to change like 3BC/IRQ7 278/IRQ5 378/IRQ7, I know I had to change mine to 378 to get my programmer working, otherwise it used to fail with the same errors u are getting.

Author Topic: Cant Flash My Matrix (Read 191 times)