Topic: Matrix Problems (Read 96 times)

froescheD · « **on:** April 04, 2003, 01:35:00 PM »

QUOTE

how to solve it?

solder

mvm · « **Reply #1 on:** April 04, 2003, 10:28:00 PM »

clean your contact-points with some alcohol

nasis x. · « **Reply #2 on:** April 04, 2003, 11:21:00 PM »

GRmods is working on a new Plug-In for X-elixis 3D,
that will give you the chance to hook all LPC mods,
for testing-programming-installing with a Plug&Hack way!

Especially for Matrix and because of the missalignements,
we will include a special circuit for direct support,
but this hasn't been tested yet,
as we don't have a Matrix mod but we are truing to support it,
through diagrams that we found on the net...

This Plug-In is called X-elixis Programmer and it will be included in X-elixis Basic kit,
that will offer you an easy way to recover a bad flash on Matrix, without a PC needed!
If the extra circuit work as programmed with Matrix,
then we will release X-elixis Adaptor, for ALL LPC modchips, that will be extra cheap!

Of course you can solder Matrix directly to the mainboard,
but this will transform your advanced modchip to a cheapmod...

=ByTcHS|AppA= · « **Reply #3 on:** April 05, 2003, 01:38:00 PM »

Use a hotmelt glue gun......thats a simple way of make sure it dont move...!!

myriad · « **Reply #4 on:** April 05, 2003, 06:07:00 PM »

Well crap. Now the screw is not even reaching the threads. I need a longer screw. I do have a hot gun. Where is the best place to put the glue. And for soldering.. Does anyone have a photo of what to solder for the Matrix no solder chip?

gamemaster14 · « **Reply #5 on:** July 03, 2003, 11:19:00 AM »

I used a pin to scrape the finish off the d0 and lpc and my X2 Lite Plus has never come misaligned.

flyjfly · « **Reply #6 on:** July 04, 2003, 11:37:00 PM »

Matrix Help Check this out. It might help with your problems. It's from the offical site.

Author Topic: Matrix Problems (Read 96 times)