Print

[nasis x.]

Ok, as I look closely chameleom I have to say,
that the only good think that I noticed in this new mod,
is that it uses 3.3V instead of 5V that x2 and BiosX are currently using, for their 1Mb modchip!

Of course you are not able yet to understand what are the diference between 3.3V and 5V chips,
but as long as GRmods advanced systems are compatible with all LPC modchips arround,
and we are using the Plug&Hack technology easier than all our competitors does
we can tell you that 3.3V chips is the right way to go!

Now about the installation of Chameleon,
there is nothing new than cheapmods Pin Header way,
while if you use it like matrix add-on,
then you have to do with misalignement of pogo pins,
that is also limited only for V1.0 and V1.1 consoles.
Also I would like to tell you that Chameleon do not include a programmer,
and for this reason it can be used only as a add on to matrix,
using matrix programmer...

In conclusion the only revolutionary thing about Chameleon is the 3.3V,
while it has a normal price for its limited use.

Of course if you chose to use X-elixis Basic kit, that includes X-elixis Programmer,
you can install Chameleon and X2 and all other LPC modchips,
in all versions ,including the newest V1.2,with Plug&Play actions
while you can program/recover Chameleon for your anlimited upgrades!
No PC and extra programmer is needed, as all can be done with X-elixis Basic and EvoX!

Finally we would like to congratulate Chameleon for using black colour pcbs,
and we hope that we have helped console hacking scene,
when we first introduced the black coloured pcbs with lusifer full...

[Ubergeek]

QUOTE (nasis x. @ Apr 1 2003, 12:51 PM)

Ok, as I look closely chameleom I have to say, that the only good think that I noticed in this new mod, is that it uses 3.3V instead of 5V that x2 and BiosX are currently using, for their 1Mb modchip!

you are so stupid that it isnt even funny

the xbox itself uses 5v for its flash rom

I think you are confused between PS2 and XBOX when you talk about supply voltages

go back to electronics school (if you ever went there)

QUOTE (nasis x. @ Apr 1 2003, 12:51 PM)

and we hope that we have helped console hacking scene, when we first introduced the black coloured pcbs with lusifer full...

You gotta be kidding me right ?

[nasis x.]

I didn't expect you to understand,
cause I guess that you don't have big experience of Plug&Hacking...

Xbox is using 5V chip after a lot of development and many tests  that comes from PC.

By using 5V chips and trying to Plug&Hack or HotSwap or align modchips,
you run the risk of burning the Nvidia chip.
For more info check on xecuter homepage...

Chameleon though, looks that it is a 3.3V voltage 1 Mb modchip,
and this is the most inovating feature that I can see in this new mod.

[Ubergeek]

QUOTE (nasis x. @ Apr 1 2003, 03:53 PM)

I didn't expect you to understand, cause I guess that you don't have big experience of Plug&Hacking... For more info check on xecuter homepage... Chameleon though, looks that it is a 3.3V voltage 1 Mb modchip, and this is the most inovating feature that I can see in this new mod.

hahahahahahahah

and you say using an LV flash rom is innovate ?

PLEASE PLEASE PLEASE fed ex me some of that acid you are on

[BenJeremy]

QUOTE (bracky @ Apr 1 2003, 02:23 PM)

People are always slamming nasis x but I think he makes a good product and does a great job of promoting it.  His chip sure works better than the one I developed.  Better than the ones you all developed also

Ummmmm..... no.

Nasis x. makes a custom cheap mod with funky connectors. Apparently it's 3D. That's it. How is a 256k mod better than a 1MB mod?

[Kreepa13]

i've heard about this 3.3 v and 5 v issues once at x-ecuter forums where this guy said x2 pogos have been frying more xboxs than than the matrix because x2 pogo or something has something to do with 5 v and matrix something has something to do with 3.3v. and since its 5v for x2 it fried all those xboxs. all that something crap doesn't make sense but the guy who explained it got kinda technical and i can't remember cuz it was a long time ago. not bashing any products i am and will alwayz be an x-ecuter fan.

[bracky]

QUOTE

Ummmmm..... no. Nasis x. makes a custom cheap mod with funky connectors. Apparently it's 3D. That's it. How is a 256k mod better than a 1MB mod?

I didn't say his chip was better.  I just said quit bashing him unless you have made a better chip yourself.  Just like I would tell someone not to bash you and your work until they have come up with something better.

[BenJeremy]

QUOTE (bracky @ Apr 1 2003, 05:22 PM)

QUOTE Ummmmm..... no. Nasis x. makes a custom cheap mod with funky connectors. Apparently it's 3D. That's it. How is a 256k mod better than a 1MB mod? I didn't say his chip was better.  I just said quit bashing him unless you have made a better chip yourself.  Just like I would tell someone not to bash you and your work until they have come up with something better.

Ubergeek DID develop a better chip. Ever heard of the Xecutor and Xecutor2 series of chips?

I'm a software developer helping make the Xbox a friendlier place for users like yourself, and I've even contributed (in the form of advice, or perhaps begging and pleading) to a feature or two implimented in some chips.

I guess you must be one of the clueless?  


(Don't take it too personally.... but berating people for not being contributors around here is like stepping through a minefield)

[spIdeZ]

QUOTE (Shafted! @ Apr 1 2003, 10:39 PM)

QUOTE (Schmo @ Apr 1 2003, 04:21 PM) QUOTE (nasis x. @ Apr 1 2003, 02:53 PM) I didn't expect you to understand, cause I guess that you don't have big experience of Plug&Hacking... Xbox is using 5V chip after a lot of development and many tests  that comes from PC. By using 5V chips and trying to Plug&Hack or HotSwap or align modchips, you run the risk of burning the Nvidia chip. For more info check on xecuter homepage... Chameleon though, looks that it is a 3.3V voltage 1 Mb modchip, and this is the most inovating feature that I can see in this new mod. Ummm, do you actually know who ubergeek is?   Obviously not by talking to him the way that you are. Also, do you take every possible opportunity to spam about your flexible PCBs? I don't know who is Ubergeek, sounds as if he is someone important. Details?

He's the head man behind Xecutor.  

[bracky]

Obviously you can't read Ben.  But I guess I should expect that from someone that idolizes a male porn star.

[Ubergeek]

QUOTE (bracky @ Apr 1 2003, 11:06 PM)

Obviously you can't read Ben.  But I guess I should expect that from someone that idolizes a male porn star.

I can assure you he reads a little better than you do

j/k

now play nice kiddies
PS dont disss Ron Jeremy - hes a god to all you fat ugly cunts out there

[Ubergeek]

QUOTE (BenJeremy @ Apr 1 2003, 10:29 PM)

and I've even contributed (in the form of advice, or perhaps begging and pleading) to a feature or two implimented in some chips.

I can 100% verify that this is correct

I still have the stains on my bedsheets

[Ubergeek]

QUOTE (Kreepa13 @ Apr 1 2003, 09:45 PM)

i've heard about this 3.3 v and 5 v issues once at x-ecuter forums where this guy said x2 pogos have been frying more xboxs than than the matrix because x2 pogo or something has something to do with 5 v and matrix something has something to do with 3.3v. and since its 5v for x2 it fried all those xboxs. all that something crap doesn't make sense but the guy who explained it got kinda technical and i can't remember cuz it was a long time ago. not bashing any products i am and will alwayz be an x-ecuter fan.

yes because they fit it the wrong way around and our 5v connection would contact with a data connection

but if you actually follow the instructions instead of rushing this would NEVER happen

but of course the installer is never at fault and xecuter sucks ass big time hehehe

im so used to it now that its comedy to me

[Wesly]

) come with better chips as you did before instead of just bashing the competition (like i said before,...the competition deserves just as much support as you guys)

[Kreepa13]