Topic: Matrix Problems? (Read 76 times)

MickeYd420 · « **on:** March 18, 2003, 03:43:00 PM »

get it algined ........then put it in mode 2 and if ur bios buts ur goood.

Make sure the G spot gets in its whole. even if ur light is busted u should still be able to get it aligned.

MickeYd420 · « **Reply #1 on:** March 19, 2003, 07:40:00 PM »

reflash the chip

MUTHAPHUQA1999 · « **Reply #2 on:** March 21, 2003, 06:45:00 AM »

I am having the same problem, I have the v1.1 xbox though, apparently the lpc holes should be filled with solder in order to make a goo connection. It sounds like your have a similar problem

sk8ermike6789 · « **Reply #3 on:** March 21, 2003, 03:54:00 PM »

on the alignnment point (d0)

HeLiuM · « **Reply #4 on:** March 22, 2003, 08:43:00 AM »

if d0 is bad your xbox boots to original bios, you dont frag unless the lpc points are in trouble. so most likely, its a bios issure

Stunix · « **Reply #5 on:** March 22, 2003, 08:46:00 AM »

Well i seemed to have fixed it. I took out the pogo that connects with the xbox mobo on my matrix and put a strand of cat 5 copper to act as the point. it appears as if that pogo was just not making contact anymore with d0. Not really sure what the hell would cause such a thing. But i'm glad it's fixed. I can have my life back:P j/j

Hope this helps some people.

machinehead746 · « **Reply #6 on:** March 22, 2003, 04:29:00 PM »

Author Topic: Matrix Problems? (Read 76 times)