Topic: Xbox Resetting Itself With Matrix... (Read 132 times)

SpankMan · « **on:** January 25, 2003, 12:48:00 PM »

You have a bad LPC contact. Clean LPC contacts with some rubbing alcohol.

limbfilter · « **Reply #1 on:** January 25, 2003, 12:55:00 PM »

what did you flash it with?

MorfiusX · « **Reply #2 on:** January 25, 2003, 01:17:00 PM »

alignment problem 100%

jujupinto85 · « **Reply #3 on:** January 25, 2003, 02:24:00 PM »

lpc points are those big points which are all in a row,

d0 is the only other point, its kindo that lonly one

lpc points just need to be religned better

MrWizdumb · « **Reply #4 on:** January 25, 2003, 03:43:00 PM »

give it a try

UrbelT · « **Reply #5 on:** February 01, 2003, 02:45:00 PM »

Still not working, maybe someone could draw me a pic of what exactly I need to solder, all my LPC holes are filled and were filled when I opened my xbox but yet it still shuts off 3 times then hangs... if anyone has any pics of what exactly I need to adjust that would be great.

Thanks
-UrbelT

Tripamang · « **Reply #6 on:** February 01, 2003, 09:06:00 PM »

So it's coming up aligned?

It really sounds like the the d0 point has a good connection and one of the LPC points has a problem, maybe one of the LPC points got bridged when you filled them in? They're not properly cleaned off? Try using a piece of kleenex on the pogo pins and on the motherboard.

Dunno other than that unless you took a pic of your MB i couldn't be much more help =/

XbOxGoD · « **Reply #7 on:** February 03, 2003, 05:47:00 AM »

reflash the chip, and re-allign.

it's nothing to do with his lpc points being bridged as he clearly states they were filled in anyway.

cannondale · « **Reply #8 on:** April 12, 2003, 11:10:00 PM »

Had the same problem when trying the evox 3.6 bios. Then realized that that version only works with the Xbox 1.1, but I have a 1.0. So I tried it with evox 2.6, which worked just fine.

Author Topic: Xbox Resetting Itself With Matrix... (Read 132 times)