xboxscene.org forums

Author Topic: Matrix Dying On Us?  (Read 139 times)

gainpresence

  • Archived User
  • Hero Member
  • *
  • Posts: 940
Matrix Dying On Us?
« on: January 25, 2003, 06:23:00 PM »
Like the Xecuter team and many others have been saying all along:

The Pogo-Pins are useless and are not a permanent solution.

Soldering should fix your problem.
Logged

krazyK

  • Archived User
  • Full Member
  • *
  • Posts: 106
Matrix Dying On Us?
« Reply #1 on: January 26, 2003, 09:48:00 AM »
Your pins just came loose you just need to keep trying untill you get them seated properly. If you want a good chip to use instead I would go for the X2 pro with the pogo pin adapter. The Matrix is a good chip. It has helped in bringing more noobs into the scene. But for more advanced hackers you'll find that the X2 pro so more in line with there needs.
Logged

ExOrCizT

  • Archived User
  • Jr. Member
  • *
  • Posts: 66
Matrix Dying On Us?
« Reply #2 on: January 26, 2003, 09:59:00 AM »
biggrin.gif  biggrin.gif
Logged

krazyK

  • Archived User
  • Full Member
  • *
  • Posts: 106
Matrix Dying On Us?
« Reply #3 on: January 26, 2003, 10:32:00 AM »
Yeah I hear you....I'm some what in the same boat. But I'll just upgrade to the X2 Pro some time in the future and I'll just mod my little brothers box with the Matrix my only hope is that I can get the external switches on my Matrix to work on the X2 Pro.
Logged

ExOrCizT

  • Archived User
  • Jr. Member
  • *
  • Posts: 66
Matrix Dying On Us?
« Reply #4 on: January 26, 2003, 10:44:00 AM »
im sellin it 65-70 bucks + shipping

it was bearly used. (about 1 week)

im sellin it to get x2 pro, because i dont want it to just stop workin like others have.. and im gettin "ok" at soldering!  i didnt want to solder a chip cause i couldnt solder... now i can "=
Logged

Marmite

  • Archived User
  • Sr. Member
  • *
  • Posts: 471
Matrix Dying On Us?
« Reply #5 on: January 26, 2003, 11:17:00 AM »
QUOTE (ExOrCizT @ Jan 26 2003, 07:44 PM)
im sellin it 65-70 bucks + shipping

it was bearly used. (about 1 week)

im sellin it to get x2 pro, because i dont want it to just stop workin like others have.. and im gettin "ok" at soldering!  i didnt want to solder a chip cause i couldnt solder... now i can "=

that is more expensive than gatting the matrix off easybuy, and you said you didn't solder external sweitches on it? I don't think that proce is reasonable, even if you did have external switches on it, they cost max $6.00 US to make.
Logged

ExOrCizT

  • Archived User
  • Jr. Member
  • *
  • Posts: 66
Matrix Dying On Us?
« Reply #6 on: January 26, 2003, 11:20:00 AM »
nope, the switches are soldered on it and work fine...
also 65 bucks.. 59 = cost of matrix, 6 = switches, plus using my solder "=)
Logged

ExOrCizT

  • Archived User
  • Jr. Member
  • *
  • Posts: 66
Matrix Dying On Us?
« Reply #7 on: January 26, 2003, 11:23:00 AM »
what would be a reasonable price then? ive seen these chips sell for 60 on this forum
Logged

krazyK

  • Archived User
  • Full Member
  • *
  • Posts: 106
Matrix Dying On Us?
« Reply #8 on: January 26, 2003, 11:26:00 AM »
I soldered my external switches to the outside of the Matrix internal switch box so that in the future if I ever wanted to remove or sell the modchip I could do so and it would be now different than a Matrix fresh out of the box.
Logged

nautiazn85

  • Archived User
  • Full Member
  • *
  • Posts: 196
Matrix Dying On Us?
« Reply #9 on: January 26, 2003, 09:12:00 PM »
biggrin.gif .
Logged