Topic: Matrix Flashing Problems (Read 101 times)

MatrixMan · « **on:** January 06, 2003, 11:49:00 AM »

put matrix onto programmer then put it into the PC port and pinch the two together

capninsano · « **Reply #1 on:** January 06, 2003, 12:46:00 PM »

Make sure you are using an intel motherboard as well. I have two AMD's and an old piece of shit P2 intel that I have to use.

MatrixMan · « **Reply #2 on:** January 06, 2003, 12:49:00 PM »

MatrixMan · « **Reply #3 on:** January 06, 2003, 01:03:00 PM »

man then i dunno send me your chip and programmer and i'll flash it for free you just pay shipping..

redfive19 · « **Reply #4 on:** January 06, 2003, 05:40:00 PM »

okay changed the battery, got it programmed...trying to install now, and the original screw won't go back in. it catches fine without the chip there

any ideas?

Nakor · « **Reply #5 on:** January 06, 2003, 06:32:00 PM »

You've stripped the top of the thread, this is very easy to do.

Use a longer screw.

mono11 · « **Reply #6 on:** January 06, 2003, 09:43:00 PM »

man i didn't have trouble with nothing on my matrix. the only thimg it happend i was using evoxD.6(blue) bios and it didn't play back up then i used evox 2.5 whitch isthe one that they recomend to use to begin for version 1.0 with and no problem at all, as far as allingment no problem either first of all i lost the dam screw and tape they send me any way i just used the original but before i even screw it in i allign the chip first just keep presure while u turn on the machine that way u don't have to screw and un screw. when u get green that it u got it. hope this help.

Author Topic: Matrix Flashing Problems (Read 101 times)