xboxscene.org forums

Author Topic: Matrix Flashing Through Evo-x  (Read 53 times)

Knuck3ls

  • Archived User
  • Full Member
  • *
  • Posts: 154
Matrix Flashing Through Evo-x
« on: December 13, 2002, 04:42:00 PM »
smile.gif

Reboot the Xbox, go to system utilities, then Flash Bios, and select the one you put in the bios folder

P.S.: Make sure you put the chip in mode 4, I made external switches for this, so much easier smile.gif
Logged

fatattack

  • Archived User
  • Newbie
  • *
  • Posts: 8
Matrix Flashing Through Evo-x
« Reply #1 on: December 14, 2002, 02:29:00 AM »
QUOTE (Knuck3ls @ Dec 14 2002, 12:42 AM)
It's pretty easy to do, get the newest EvoX dashboard, ftp to it, and on the C: partition of the harddrive, make a bios folder if it not already there and put the bios in it.

Make sure its 256k first smile.gif

Reboot the Xbox, go to system utilities, then Flash Bios, and select the one you put in the bios folder

P.S.: Make sure you put the chip in mode 4, I made external switches for this, so much easier smile.gif

                                    noticed that part already but i was under the impression that it was to flash the on board bios

guess i was wrong thanks !
Logged

Gamer

  • Archived User
  • Newbie
  • *
  • Posts: 45
Matrix Flashing Through Evo-x
« Reply #2 on: December 14, 2002, 03:02:00 AM »
QUOTE (manekineko @ Dec 14 2002, 09:11 AM)
how'd you make external switches for a Matrix?  I checked tutorials and didn't see anything on this

                                    Read this post from start to finish:

http://forums.xbox-s...t=ST&f=3&t=9546
Logged