Topic: Matrix Reset Problem (Read 74 times)

SuSpEcT · « **on:** November 11, 2002, 11:31:00 AM »

Check the track

Hope it helps

totaldrk62 · « **Reply #1 on:** November 11, 2002, 11:58:00 AM »

Any help is appreciated. Thank you very much, I'll try it when I get home and see if I can come up with anything.

Potenza · « **Reply #2 on:** November 11, 2002, 01:21:00 PM »

QUOTE (totaldrk62 @ Nov 11 2002, 06:58 PM)

Any help is appreciated. Thank you very much, I'll try it when I get home and see if I can come up with anything.

If you have an new HD and are using evox...Isn't it logical your XBOX won't work without a modchip installed? Don't you need to get the original dash renamed and HDD locked....

Just a thought

totaldrk62 · « **Reply #3 on:** November 11, 2002, 01:51:00 PM »

QUOTE (Potenza @ Nov 11 2002, 08:21 PM)

QUOTE (totaldrk62 @ Nov 11 2002, 06:58 PM)

Any help is appreciated. Thank you very much, I'll try it when I get home and see if I can come up with anything.

If you have an new HD and are using evox...Isn't it logical your XBOX won't work without a modchip installed? Don't you need to get the original dash renamed and HDD locked....

Just a thought

Well the original problem could have been the HD yes but now I can't even get it to boot anything. You don't even need a hard drive in there to get to the error screen or a modded bios.

totaldrk62 · « **Reply #4 on:** November 11, 2002, 01:54:00 PM »

QUOTE (limbfilter @ Nov 11 2002, 08:30 PM)

Bingo! It's your hard drive. Put in you old one and see how you do...I belive you jumped the gun a bit w/ your matrix....All that you probably needed to do was reposition the chip. Since you stripped the threads you can still solder it back in.....however if I were you I'd find someone to do that for you.

I could do the soldering myself but I am too lazy. I jus found a longer screw, that worked.

Author Topic: Matrix Reset Problem (Read 74 times)