xboxscene.org forums

Author Topic: Help! Device Not Found!  (Read 81 times)

the_Watchers_eye

  • Archived User
  • Full Member
  • *
  • Posts: 192
Help! Device Not Found!
« on: November 05, 2002, 03:56:00 AM »
1) As soon as I stuck my programmer with matrix into my printer port the red light came on, it was constant. When I flashed it the light was constant aswell.

2) I used the default settings on the WinLPC program.

3) No I didn't check if any IRQs were being shared, since everything worked when I followed the manual.

4) Does not apply to me.
Logged

Elidion

  • Archived User
  • Newbie
  • *
  • Posts: 2
Help! Device Not Found!
« Reply #1 on: November 05, 2002, 04:14:00 AM »
Thanks, but the settings I was refering to were your LPT1 settings in your bios.

Also for some reason at least on my computer the image isnt showing up so here it is again...(Maybe its because I put it on geocities heh). Now its on my companys server.

user posted image
Or click here
Logged

Foust

  • Archived User
  • Newbie
  • *
  • Posts: 12
Help! Device Not Found!
« Reply #2 on: November 05, 2002, 06:21:00 AM »
My programer is missing that diode as well, however I flashed without much difficulty. When it is plugged in to the lpt1 port (not using a cable of course) The led is solid red, and stays that way till you remove the programer. I used wmilk with the command line specified in the manual.
I would continue to play with the lpt port settings, as that is probably your problem and not the programmer. Also make sure you have a fresh battery in the programmer.
Logged