xboxscene.org forums

Author Topic: Matrix Arrived But Is Missing The Screw  (Read 61 times)

aragorn

  • Archived User
  • Newbie
  • *
  • Posts: 24
Matrix Arrived But Is Missing The Screw
« on: October 31, 2002, 11:53:00 AM »
There is not a screw coming with the matrix. The screw you are suppose to use is on the XBOX moterboard. Just look at the installation tutorial.
Logged

Nervous

  • Archived User
  • Newbie
  • *
  • Posts: 8
Matrix Arrived But Is Missing The Screw
« Reply #1 on: October 31, 2002, 12:38:00 PM »
pop.gif
Logged

laggerific

  • Archived User
  • Newbie
  • *
  • Posts: 15
Matrix Arrived But Is Missing The Screw
« Reply #2 on: October 31, 2002, 01:52:00 PM »
You know...that is true.  Thank you.

Let me tell you, though.  I have had enough issues trying to get this chip in my hand that I just immediately jumped to conclusions.

I had done my research on this...a month ago...when I ordered it.  So it just slipped my mind.

Again, thanks...that's a load off my mind.
Logged

Bugman

  • Archived User
  • Newbie
  • *
  • Posts: 21
Matrix Arrived But Is Missing The Screw
« Reply #3 on: October 31, 2002, 03:43:00 PM »
I'd recommend going through your screw collection and find a screw of the same diameter but just a little bit longer. I've read a few messages from people saying they stripped the screw hole using the original screw. I used a screw from an old PSX case and it fits nice and tight.
Logged

AmpH

  • Archived User
  • Newbie
  • *
  • Posts: 1
Matrix Arrived But Is Missing The Screw
« Reply #4 on: October 31, 2002, 03:50:00 PM »
QUOTE (Bugman @ Oct 31 2002, 10:43 PM)
I'd recommend going through your screw collection and find a screw of the same diameter but just a little bit longer. I've read a few messages from people saying they stripped the screw hole using the original screw. I used a screw from an old PSX case and it fits nice and tight.

                                    That's bullshit, just use the screw from your motherboard
Logged

clifface

  • Archived User
  • Jr. Member
  • *
  • Posts: 58
Matrix Arrived But Is Missing The Screw
« Reply #5 on: November 01, 2002, 01:52:00 AM »
What the hell?!?!  Your first post is a flame.  Who are you to tell him it's bullshit what he read.  In fact if you did some research you would see that when the matrix came out there were quite a few people that stripped it.  One person even made a tutorial on using a bolt instead.  I hope you start reading the threads before you post again in the future.
Logged

WiKKiD

  • Archived User
  • Sr. Member
  • *
  • Posts: 412
Matrix Arrived But Is Missing The Screw
« Reply #6 on: November 01, 2002, 07:38:00 AM »
Wow...
Logged

gs32

  • Archived User
  • Newbie
  • *
  • Posts: 7
Matrix Arrived But Is Missing The Screw
« Reply #7 on: November 01, 2002, 08:59:00 AM »
Congrats.

Just follow the New HD readme and you should be okay.

I guess the step that a lot are screwing up on is the portion of copying the contents of your XBox C & E drives over to the "CDrive" and EDrive" directories of the New HD ISO, and then burning a CD with that stuff.

I used the NewHDEvox thing and it worked flawlessly.

Just keep in mind that you'll have zero out the drive if its used though.
Logged

laggerific

  • Archived User
  • Newbie
  • *
  • Posts: 15
Matrix Arrived But Is Missing The Screw
« Reply #8 on: November 01, 2002, 10:04:00 AM »
damn...I was hoping the EvoxHD setup would zero it out for me...

When you say zero out, though...is that a euphimism for just doing a full format vs. a quick format?  I always thought of Zeroing a harddrive as something to be done back in the day when the drive was having some problems.

So...all I need to do is put the HD into my PC and under windows2000 do a full format on the drive?  Or do I need to zero it out with a specific program?
Logged